Navilock 0.39m, MD6 - D-SUB 9

Connecting Cable MD6 Serial - D-SUB 9 Serial for GNSS Receiver with PPS, 0.39m Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox and SiRF. In order to connect the GNSS receiver to a serial port you need this specific connecting cable. The data protocol will be provided by the D-SUB 9 plug. On pin 6 you can analyze the PPS TTL signal from u-blox 8 receivers. Over opend cable end you connect the receiver to 5V DC.

- Connector: MD6 jack, D-SUB 9 jack, open cable end.
- Power supply via open cable end.
- red: +5V.
- black: GND.
- Length: 6 pin connecting cable ca. 59 cm (including connector).
- Length: PS/2 cable ca. 39 cm (including connector).

<b>System requirements </b>
- Navilock serial MD6 GNSS receiver.
- One free SUB-D9 jack.

<b>Package content </b>
- Connecting cable for GNSS receiver.

<b>Package </b>
- Poly bag.