GPS性能
采集时间-寒冷 |
26 s |
应用信号 |
B1, E1, L1 |
灵敏度 |
-167 dBmW |
导航协议 |
GGA, GSA, GSV, RMC, VTG |
采集时间-热 |
1 s |
接口 |
USB |
频率 |
1575.42 MHz |
芯片组 |
u-blox 8 |
u-blox 8 chipset, USB 2.0 Type Micro B, 1.5m, -167dBm, IPX6, 5V DC, 65 x 45 x 22mm
The USB 2.0 Multi GNSS OTG Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. It can be used as a GNSS Receiver with a mobile device and a suitable routing software for navigation.
- Connector: USB 2.0 Type Micro-B OTG male
- Chipset: u-blox 8 UBX-M8030-KT
- Frequency:
- GPS: L1, 1575.4200 MHz
- GLONASS: L1, 1602 (k x 0.5625) MHz
- BEIDOU COMPASS: B1, 1561.0980 MHz
- GALILEO: E1, 1575.4200 MHz
- QZSS: L1, 1575.4200 MHz
- Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate up to 115200 bps
- Update rate:
- single GNSS: 18 Hz (e.g. GPS solo)
- multi GNSS: 10 Hz (e.g. GPS+GLONASS)
- Sensibility max. -167 dBm
- IPX6 protection class
- Magnetic, non-slip on the bottom
- LED-indicator for GPS status
- Operating temperature: -20 °C ~ 60 °C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 1.5 m
- Dimensions (LxWxH): ca. 65 x 45 x 22 mm