Netgear FS728TP Managed network switch Power over Ethernet (PoE)

Netgear FS728TP Managed network switch Power over Ethernet (PoE)

EAN: 606449050226
MPN: FS728TP-100NAS
发送方式:
交货来源:
德国
更新价格...
运输成本:
От

凡购买和价格 (Advertising *)

顶部
в наличии
* Alle Preise inkl. der jeweils geltenden gesetzlichen Mehrwertsteuer, ggfs. zzgl. Versandkosten. Alle Angaben ohne Gewähr. Preisänderungen sind in der Zwischenzeit möglich.

技术特点

顶部

管理功能

支持多重播放 Y
系统事件日志 Y
支持服务质量(QoS) Y
网上管理 Y

数据传输

MAC 地址表 8000 entries
存储转发 Y
最大数据传输率 1 Gbit/s
VLAN 数量 128

其他功能

认证方法 IEEE 802.1x
等待时间 20 μs
带宽 12.8 Gbit/s
尺寸(宽 x 深 x 高) 440 x 257 x 43 mm
电源需求 100 - 240 VAC, 50 - 60 Hz

端口 & 界面

SFP/SFP+端口数量 2
基本交换 RJ-45 以太网端口数量 24
SFP模块插槽数量 2
千兆以太网(铜)端口数量 4
DC-IN插口 Y

联网

端口镜像 Y
广播风暴控制 Y
全双工传输 Y
链路汇集 Y
生成树协议 Y
网络标准 IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
流量控制支持 Y
动态主机配置协议客户 Y

能量控制

功耗(一般操作) 225 W

性能

程序包缓冲区内存 3 MB
平均故障间隔时间 176000 h
噪音水平 49 dB
可堆叠 N

以太网电源(PoE)

支持以太网(PoE) Y

安全

存取控制清单(ACL) Y

环境条件

储存温度范围 (T-T) -20 - 70 °C
储存相对湿度范围(H - H) 0 - 95%
运行湿度范围(H-H) 0 - 90%
工作高度 0 - 3000 m

设计

认证 CE mark\nFCC Part 15 Class A\nVCCI Class A\nC-Tick\nEN 55024\ncUL IEC 950/EN 60950\n

重量和尺寸

重量 3600 g

另外

连接方式 Wired
运行温度范围(T - T) 0 - 50 °C
FS728TP - 1 Gbit/s Full 24-port PoE Solution Plus Easy Browser-based Management
NETGEAR ProSafe Smart Switches fill the gap between unmanaged and fully managed switches. The family of ProSafe Smart Switches is designed for growing businesses that want control over their network without the cost and complexity of a full Layer 2/Layer 3 management implementation. This PoE-capable Smart Switch, the FS728TP, provides power and data using built-in IEEE 802.3af PoE on all 24 ports. In addition, the FS728TP offers an intuitive Webbased management tool for quick and easy deployment and configuration making it ideal for deploying access points, VoIP phones and IP-based surveillance cameras. This switch is equipped with highly advanced features such as access control lists (ACL), 802.1x port authentication, enhanced QoS, rate limiting and IGMP snooping among others to provide a small and medium-sized business with a network that is geared for growth while providing scalability and reliability. With the utility of 24 10/100 Mbps ports, four copper 10/100/1000 Mbps ports and two combination (copper/hot-swappable small form-factor pluggable (SFP)) Gigabit ports for optional fiber connectivity, growing business networks, classrooms and workgroups can benefit from superior performance and keep up with expanding network needs. This high-performing switch features a non-blocking wire-speed architecture with an 12.8 Gbps switching capacity for maximum data throughput. All 28 RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink™ technology to make the right link.

Full-featured, Flexible Power over Ethernet (PoE)
With a total power budget of 195 Watts, customers can choose to plug in up to 24 Ethernet or Fast Ethernet devices and mix in up to 24 802.3af IP-based devices. Power-over-Ethernet (PoE), optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones, and IP-based surveillance cameras. Power-over-Ethernet (IEEE 802.3af) capabilities reduce installation time and costs for many new network productivity devices. Free your wireless AP deployments and IP cameras from the restrictions of power outlet proximity using a standard Cat 5 UTP cable. Enable uninterruptible power supply for all your PoE devices by powering your switch from a UPS device.

Advanced Security
These switches also provide advanced features that provide more robust security to the SMBs. These include:

- 802.1x for authentication
- ACL filtering to permit or deny traffic based on MAC and IP addresses.

Advanced Quality of Service
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads. The ProSafe FS728TP provides several advanced QoS features:

- 802.1p based prioritization.
- Layer 3-based (DSCP) prioritization.
- Rate limiting.

“Smart” Management Features
Manage all ProSafe Smart Switches as from an easy-to-use Web console that can be used to configure all features, as well as monitor and trouble-shoot. These switches also have SNMP (v1, 2 and 3) to collect and track data to monitor the network health, as well as manage devices, and more easily enforce critical IT controls and policies. SNMP v2c is most commonly deployed, as it provides better reporting capabilities than SNMP v1. Companies interested in more robust security may opt for SNMP v3, which provides data encryption. All ProSafe Smart Switches provide world-class reliability with a Lifetime Warranty and optional ProSupport Maintenance Packages. These switches are optimized for ProSafe Network Management Software (NMS100) and works with other SNMP-based management software.
Фотографии

    密码恢复
    要恢复您的密码,请在下面您的电子邮件地址框与您已注册请输入:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    发生了错误。请检查您的电子邮件地址,然后再试一次。
    Ваш новый пароль:

    名称为空


    Выберите страну доставки

    您还没有写消息

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    已发送您的消息!

    親密

    1
    产品目录
    取消
    Бренды:
      Выберите бренды
        查看更多
          地區搜索
          全球
          Категории
            产品名称
            !

            欢迎您!

            很抱歉,但这个版本在中国语言网站正在开发中,可能包含错误!

            或者,也可以选择其他语言: