其他功能
| 支持数据传输率 |
108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps |
| 无线局域网标准 |
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g |
| 遵守工业标准 |
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.3af |
性能
| 接收机灵敏度 |
802.11b:\n2 Mbps -94 dBm\n5.5 Mbps -92 dBm\n11 Mbps -90 dBm\n802.11g:\n6 Mbps - 91 dBm\n9 Mbps - 91 dBm\n12 Mbps - 90 dBm\n18 Mbps - 87 dBm\n24 Mbps - 85 dBm\n36 Mbps - 80 dBm\n48 Mbps - 75 dBm\n54 Mbps - 70 dBm\n802.11a:\n6 Mbps - 92 dBm\n9 Mbps - 91 dBm\n12 Mbps - 90 dBm\n18 Mbps - 86 dBm\n24 Mbps - 84 dBm\n36 Mbps - 79 dBm\n48 Mbps - 72 dBm\n54 Mbps - 70 dBm |
| 2.4 GHz |
Y |
| 5 GHz |
Y |
| 频段 |
2.4/5 GHz |
| 以太网的数据传输率 |
10, 100 Mbit/s |
端口 & 界面
| 广域网接口 |
Ethernet (RJ-45) |
| 接口类型 |
LAN, WAN |
天线
| 天线增益水平（最大值） |
5 dBi |
| 天线接口类型 |
SMA |
另外
| 数据传输率（最大） |
108 Mbit/s |
| 包括 AC 适配器 |
Y |
| 以太网路(RJ-45)连接接口数量 |
1 |
5 GHz & 2.4 GHz, 54 Mbps, 802.11a/b/g, LAN 10/100BaseT, 128 Clients, WPA/WPA2, 1 x RJ-45, 6 x LED, PoE
PROSAFE DUAL BAND LIGHT WIRELESS ACCESS POINT
- Part of the NETGEAR ProSafe Smart Wireless Solution, the 802.11a/g Dual Band Light Wireless Access Point will only work with the NETGEAR ProSafe Smart Wireless Switch.
- Not a standalone access point, managed by WFS709TP.
Intelligent Networking Features for a Scalable, Secure Solution
NETGEAR's ProSafe Dual Band Light Wireless Access Point WAGL102 delivers the secure, reliable, high-performance wireless local area networks (WLANs) today's mobile workforce demands. The WAGL102 Access Point supports both 5 GHz and 2.4 GHz 54 Mbps radio transmission in both 802.11g and 802.11a in turbo mode. It supports up to 128 simultaneous wireless clients and client types within the same coverage area. Managed and configured by the NETGEAR Prosafe Smart Wireless Controller, the WAGL102 is a "light" wireless access point which is part of the overall NETGEAR ProSafe Smart Wireless Solution. The WAGL102 supports integrated IEEE 802.3af Power over Ethernet (PoE).
Secure
Managed and configured by the NETGEAR ProSafe Smart Wireless Controller (WFS709TP), the WAGL102 is a "light" wireless access point that implements the 802.11 standard. As part of the centralized architecture, much of the security configuration such as WPA2-Enterprise (802.11i), WPA2 and 802.1x support happens at the NETGEAR ProSafe WFS709TP. The NETGEAR ProSafe Smart Wireless Controller also supports MAC address authentication, support for multiple BSSID/VLANs and guest/contractor access.
Versatile
As part of the NETGEAR ProSafe Smart Wireless Solution, the WAGL02 is cost-effective and simple to install and use. In addition, it's plenum rated—appropriate for placement above drop-down ceilings and under raised floors. Fitted with two powerful detachable 5 dBi antennas and compatible with NETGEAR's ProSafe 2.4 GHz antennas for expanded wireless capacity and range. Protected with a NETGEAR Lifetime Warranty†, the WAGL102 includes the embedded IEEE 802.3af Power over Ethernet (PoE) port which expands installation options by eliminating the need to locate the Light Wireless Access Point near a power outlet.
