管理功能
| 支持多重播放 |
Y |
| 系统事件日志 |
Y |
| 网上管理 |
Y |
| 支持服务质量（QoS） |
Y |
数据传输
| MAC 地址表 |
32000 entries |
| 存储转发 |
Y |
| 支持数据传输率 |
10/100/1000 Mbps |
| 交换容量 |
480 Gbit/s |
| 最大数据传输率 |
10 Gbit/s |
| 静态路由数量 |
64 |
| VLAN 数量 |
1024 |
性能
| 处理器频率 |
750 MHz |
| 内存类型 |
DDR2 |
| 可堆叠 |
Y |
| 内置存储器 |
512 MB |
| 固件可升级 |
Y |
| 闪存 |
128 MB |
联网
| 端口镜像 |
Y |
| 广播风暴控制 |
Y |
| IP路由 |
Y |
| 生成树协议 |
Y |
| 流量控制支持 |
Y |
| 动态主机配置协议客户 |
Y |
| VLAN支持 |
Y |
| IGMP侦听 |
Y |
| 速率限制 |
Y |
| 链路汇集 |
Y |
| 动态主机配置协议服务器 |
Y |
| 10G支持 |
Y |
| 全双工传输 |
Y |
端口 & 界面
| 基本交换 RJ-45 以太网端口数量 |
4 |
| 以太网铜缆技术 |
10BASE-T, 1000BASE-T, 100BASE-T |
| DC-IN插口 |
Y |
| SFP +模块插槽数量 |
4 |
| 控制台端口 |
RS-232 |
安全
| MAC（媒体存储控制）地址过滤 |
Y |
| 存取控制清单(ACL) |
Y |
| SSH / SSL支持 |
Y |
设计
| 电磁兼容性 |
CE, FCC, EN 55022, C-Tick, EN 50082-1, EN 55024 |
| 改良型电缆管理 |
Y |
| 机架安装 |
Y |
| 安全 |
CE, CSA, UL |
环境条件
| 非运行高度 |
0 - 10000 m |
| 运行温度范围（T - T） |
32 - 122 °F |
协议
| 管理协议 |
SNMP, LLDP, LLDP-MED, TFTP, SFTP, HTTP, SCP |
24 x 10 GBase-T, 4 x SFP+, IGMP, USB
The NETGEAR 10 Gigabit M7100 series consists of a fully managed, low-latency, line-rate 10G Copper "Base-T" switch solution; 24 ports 10GBase-T (RJ45) that support Fast Ethernet, Gigabit Ethernet and 10 Gigabit speeds for server, storage and network progressive upgrade; 4 ports SFP+ that broaden 10 Gigabit connectivity for 1G/10G fiber uplinks and other DAC connections.
M7100 series is ideal for all organizations considering reliable, affordable and simple 10 Gigabit Ethernet Top-of-Rack server access layer; and high-density, high-performance 10GbE backbone architectures.
Layer 2+ with static routing
- M7100 series comes with Port-based / VLAN-based / Subnet-based "static routing" Layer 2+ versions
- L3 fixed routes to the next hop towards the destination network are added to the routing table
- L3 routing is wire-speed in M7100 series hardware with up to 128 static routes (IPv4)
10 Gigabit transition with Base-T
- 10GBase-T, like other Base-T technologies, uses the standard RJ45 Ethernet jack
- It is backward compatible, auto-negotiating between higher and lower speeds – thereby not forcing an all at once network equipment upgrade
- Cat5/Cat5E are supported for Gigabit speeds; when Cat6 twisted pair copper cabling is minimum requirement for 10 Gigabit up to 30 meters
- Cat6A or newer Cat7 cabling allow for up to 100 meter 10GBase-T connections
Top-of-the-line performance and IPv6 ready
- 32K MAC addresses; 480Gbps switching fabric; 12K jumbo frames; Auto-iSCSI Flow Acceleration; Auto-EEE Energy Efficient Ethernet
- IPv4/IPv6 comprehensive traffic filtering (ACLs), and prioritization (QoS - DiffServ)
Top-of-rack availability
Two redundant, hot-swap power supplies (one PSU comes with the switch; second optional PSU is ordered separately)
Two removable fan trays provide front-to-back cooling airflow for best compatibility with data center hot aisle / cold aisle airflow patterns
Industry standard management
- Industry standard command line interface (CLI)
- Fully functional NETGEAR web interface (GUI)
