设计
支持的主板外形 |
ATX, ITX, Micro-ATX |
3.5" 托架数量 |
3 |
内部3.5英寸托架数量 |
3 |
侧窗 |
Y |
2.5" 托架数量 |
2 |
最大显卡长度 |
415 mm |
最大CPU散热器高度 |
13 mm |
照明 |
Y |
材料厚度 |
0.6 mm |
防灰尘过滤器 |
Y |
扩展插槽数 |
7 |
格式要素 |
Tower |
类型 |
PC |
适用于 |
Gaming |
冷却
最大前部风扇 |
3 |
支持的后部风扇直径 |
120 mm |
最大后部风扇 |
1 |
前部风扇安装 |
3x 120 mm |
端口 & 界面
USB 3.0(第 1代3.1)Type-A 端口数量 |
1 |
ATX/Micro-ATX/ITX, 3x 3.5", 2x 2.5", SPCC 0.6mm, USB 3.0, 2x USB 2.0, 3x 120mm LED Blue
Hummer TG is the chassis that more evenly combines high performance and aesthetics within the Hummer series. It has been built upon an elegant clean lines design, with a powerful blue LED illumination on its front and tempered glass panels in front and right sides, wrapping and showing a wide space compatible with the best cooling systems.
- 4 mm tempered glass front and side panels
- 3x pre-installed 12 cm fans with 33 blue LED points
- Compatible with 360 mm liquid cooling systems
- Isolated compartment for PSU and HDD
- Dust filter for PSU zone
- Allows up to 4 fans installation
- Excellent wiring management
- Compatible with large graphics
- High speed USB 3.0
Elegant design
Hummer TG is a robust chassis compatible with ATX, mini ATX and ITX motherboards, a perfect case for those who want to set up an equipment where aesthetics and high performance go hand in hand.
With a sober and elegant dark appearance, Hummer TG design stands out for its three front fans with blue LED lighting, as well as for the wide vision that its front and lateral tempered glass panels offer of the chassis' insides and all of its components.
Accessibility
Atop of its attractive front panel (lighted by 3 fans with 33 blue LED dots), Hummer TG displays two USB 2.0 ports and one USB 3.0 port on its top, as well as audio connections.
Cooling system
Hummer TG interior design is able to house a powerful cooling system, since you can add to its three 120 mm pre-installed front fans another fourth 120 mm fan in the back, or replace the front ones with a liquid cooling system up to 360 mm height.
In order to keep optimum temperature levels inside the PC, Hummer TG has at its base a lower compartment where to locate PSUs and HDDs, so that its heat emission is not transferred to the other components.
A perfect airflow
Thanks to its three front fans, a cold air stream will enter directly into Hummer TG to cool all components installed within.
Both rear fan and PSU strategic placement help expelling outside all the heat, thus allowing an efficient airflow.
All Hummer TG air intakes feature removable dust filters.
High performance
A high performance equipment requires a superior cooling system to help keeping a proper functioning of all its installed components.
Therefore, Hummer TG offers the possibility of housing large liquid cooling systems inside, since it incorporates (among other details) cable gutters to help keeping a tidy installation.
A wide range of possibilities
Hummer TG has room to install one front 360, 240 or 120 mm radiator to replace its three front pre-installed fans, thus implementing a superior cooling system.
In addition, Hummer TG has in its left side all the necessary space for a perfect wiring management, allowing a clean assembly in which nothing gets in the way of the cooling air stream.
Interior space
It is possible to install inside Hummer TG graphics cards of great length (up to 415 mm).
Also, it is possible to house coolers with a maximum height of 163 mm into Hummer TG, which will allow you to install almost any high-end cooler on the market.
Large storage capacity
Hummer TG has space to install up to three 3.5 " HDD units on the bottom, as well as two 2.5" SSD units on the sides.
Thus, by installing the SSD units in the chassis' side panel, you'll get a better use of Hummer TG inner space, as well as an improved airflow.