联网
| 布线技术 |
10BASE-T, 10BASE-FL |
| 双机热备系统 |
Full, Half |
其他功能
| 接收功率 |
-31 - -11 dBmW |
| 全双工传输 |
Y |
| 发射功率 |
-21 - -11 dBmW |
性能
| 可支持的光纤电缆直径 |
50/125, 62.5/125, 100/140 µm |
| 光纤模式结构 |
Multi-mode |
| 最大传输距离 |
5000 m |
| 波长 |
1310 nm |
能量控制
| 外接电源转接器 |
Y |
| 接受频率 |
60 Hz |
| 输入电压 |
120 V |
另外
| 数据传输率（最大） |
10 Mbit/s |
| 连接方式 |
Wired |
10BASE-FL / 10BASE-T, MM, ST, 1310 nm, 5 km, 10 dBm, US Plug
10BASE-FL to 10BASE-T Media Converter
- The FlexPoint 10FL/T is a 10BASE-FL fiber to 10BASE-T UTP media converter
- UTP port automatically supports Full or Half-Duplex
- Features a crossover switch for easy connection to hubs, switches or workstations
- Extends network distances up to 120km
- Supports Link Propagate for the remote detection of link faults
- Supports most network interfaces with a wide variety of cable and connector types
- Labeled status LEDs for quick and easy installation
- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint Powered Chassis
- Completely software independent with no installation of drivers required
- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
The FlexPoint 10FL/T is a 10BASE-FL fiber to 10BASE-T UTP media converter that provides reliable and cost-effective network connectivity and fiber extension.
The UTP port auto-negotiates the duplex mode of the attached device for plug-and-play installations. The port detects and corrects wiring polarity reversals, and features a crossover switch that eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.
The fiber port operates at 850nm, 1310nm or 1550nm, and features ST, SC or MT-RJ connectors. Multimode fiber models support distances up to 5km, and single-mode fiber models support distances up to 120km.
The FlexPoint 10FL/T supports Link Propagate, which is a fault detection tool that provides a local indication of a remote link loss by disabling the port and propagating the loss of link from one port to the other.
The FlexPoint 10FL/T features descriptions of the LED indicators on the label for easy in-the-field installation and maintenance. The LEDs report the availability of power, port activity and link status, speed and duplex modes.
FlexPoint modules can be mounted utilizing optional wallmounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a highdensity 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used as standalone devices can be powered by an external AC to DC power adapter, or through the 5VDC chassis connector. Standalone modules can also be powered by attaching an external DC power supply (18-60VDC). When used in the 14-Module power-redundant Powered Chassis with any combination of AC and DC power supplies, the installed modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options provide flexible upgrade paths as network requirements change and grow.
FlexPoint unmanaged media converters are easy to use and provide dependable fiber connectivity in Enterprise and Government networks around the world.
