联网
| 布线技术 |
10BASE-T, 10BASE-2 |
| 双机热备系统 |
Half |
能量控制
| 外接电源转接器 |
Y |
| 接受频率 |
60 Hz |
| 输入电压 |
120 V |
另外
| 数据传输率（最大） |
10 Mbit/s |
| 连接方式 |
Wired |
| 以太网路(RJ-45)连接接口数量 |
1 |
10BASE-T / 10BASE-2, 1 x RJ-45, 1 x BNC, US Plug
10BASE-T Copper to 10BASE-2 Coax Media Converter
- The FlexPoint 10T/2 is a Half-Duplex 10BASE-T to 10BASE-2 coax converter
- Seamlessly connects 10BASE-2 devices to 10BASE-T hubs or workstations
- Supports 50 ohm coax to a maximum distance of 185m and 30 stations
- Features convenient, switch-selectable coax line termination to save cost and space
- Features a UTP crossover switch and automatic polarity detection, correction and indication
- Labeled status LEDs for quick and easy installation
- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint Powered Chassis
- Completely software independent with no installation of drivers required
- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
The FlexPoint 10T/2 is a Half-Duplex 10BASE-T UTP to 10BASE-2 coax media converter that facilitates the connection of a coax segment to a 10BASE-T hub or workstation.
No manual configuration is required with the plug-and-play FlexPoint 10T/2. Connect the UTP and coax cables and the installation is complete.
The FlexPoint 10T/2 supports categories 3, 4 or 5 wiring and connects to distances up to 100m. The FlexPoint 10T/2 detects and corrects wiring polarity reversals, and features a crossover switch that facilitates connection to a hub or a workstation.
The FlexPoint 10T/2 features a BNC connector supporting 50 ohm cabling with distances up to 185m. Per IEEE 802.3 standard, up to 30 workstations can be attached to the coax segment. A termination switch provides a convenient 50 ohm cable termination.
Descriptions of the LED indicators are provided on the label for easy in-the-field installation and maintenance. The LEDs report the availability of power, port activity and link status, polarity reversal detection and correction, collision and jabbers.
FlexPoint modules can be mounted utilizing optional wallmounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant Powered Chassis.
FlexPoint modules installed in the 5-Module shelf or used as standalone devices can be powered by an external AC to DC power adapter, or through the 5VDC chassis connector. Standalone modules can also be powered by attaching an external DC power supply (18-60VDC). When used in the 14-Module power-redundant Powered Chassis with any combination of AC and DC power supplies, the installed modules are powered via the 5VDC chassis connector.
The wide variety of FlexPoint mounting and power options provide flexible upgrade paths as network requirements change and grow.
FlexPoint unmanaged media converters are easy to use and provide dependable fiber connectivity in Enterprise and Government networks around the world.
