性能
接收功率(最大) |
-14 dBmW |
接收功率(最小) |
-31 dBmW |
链路预算 |
7 dB |
可支持的光纤电缆直径 |
50/125, 62.5/125, 100/140 µm |
发射功率(最小) |
-24 dBmW |
最大传输距离 |
5000 m |
光纤模式结构 |
Multi-mode |
发射功率(最大) |
-14 dBmW |
波长 |
1310 nm |
能量控制
输入电压 |
100-120 V |
接受频率 |
60 Hz |
支持以太网(PoE) |
N |
外接电源转接器 |
Y |
另外
数据传输率(最大) |
100 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
连接方式 |
Wired |
10/100BASE-T UTP to 100BASE-X Intelligent Media Converter and Network Interface Device, MM/DF, 5km, ST
The iConverter 10/100M2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M2 provides intelligent, securely managed service demarcation at the customer premises, offering Layer 2 Control Protocol (L2CP) policy control, Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities. The 10/100M2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.
The 10/100M2 is available as a compact standalone unit or as a chassis plug-in module. The hot-swappable 10/100M2 plug-in module can be mounted in a 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.
The plug-in module can manage other modules in the same chassis and operate as a managed 10/100 media converter. It features two Ethernet backplane ports for connectivity to adjacent modules in a chassis for multi-port and multi-service configurations.
The standalone 10/100M2 is available as a tabletop or wall-mount unit. The tabletop model can be DIN-rail mounted using an optional DIN-rail mounting kit. Both the tabletop and the wall-mount models are DC powered and are available with an external AC/DC power adapter or a terminal connector for DC power. The 10/100M2 standalone unit combines management capability with a compact chassis for deployment at the demarcation point.