联网
| 布线技术 |
1000BASE-SX, 1000BASE-LX |
性能
| 光纤模式结构 |
Multi-mode, Single-mode |
| 最大传输距离 |
20000 m |
另外
| 数据传输率（最大） |
1000 Mbit/s |
| 连接方式 |
Wired |
1000FF , DF / SF, MM / SM, SC/SC, 20 km max
Gigabit Fiber-to-Fiber Managed Media Converter
- 1000BASE-SX or 1000BASE-LX single-mode to multimode fiber converter
- Supports multimode, single-mode and single-fiber with SC connectors
- Supports distances up to 80km or longer
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- SNMP management via NetOutlook provides real-time port and module information, remote parameter configuration and trap notification
- Management is available with the addition of a management module to the chassis
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
The iConverter 1000FF managed media converter provides multimode to single-mode and dual fiber to single fiber conversion, and is a cost-effective solution for extending fiber network distances.
iConverter 1000FF models feature SC connectors and are available with multimode, single-mode and single-fiber options. The single-mode fiber port supports distances up to 80km, and the multimode fiber port supports distances up to 550m.
The 1000FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation, and reporting.
The iConverter 1000FF is available as a compact, unmanaged standalone unit, or as a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable plug-in module can be mounted in a high-density 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.
The standalone 1000FF can be wall-mounted and is DC powered. It can be ordered with an external AC/DC power adapter, or it can be directly powered using a 2-pin terminal connector.
