另外
| 数据传输率（最大） |
10 Mbit/s |
| 连接方式 |
Wired |
| 以太网路(RJ-45)连接接口数量 |
1 |
1 x RJ-45, 1 x Coax, 10BASE-T / 10BASE-2, 185m, 30 stations, SNMP
10BASE-T to 10BASE-2 Managed Ethernet Media Converter
Features
- The iConverter 10T/2 is an IEEE 802.3 compatible 10BASE-T unshielded twisted pair (UTP) to 10BASE-2 coax converter
- Seamlessly connects 10BASE-T hubs via coax and coax network segments to 10BASE-T hubs
- SNMP management via NetOutlook provides real-time port and module information, remote parameter configuration and trap notification
- Management is available with the addition of a management module to the chassis
- Supports 50 ohm coax to a maximum distance of 185m and 30 stations
- Features a UTP crossover switch and automatic polarity detection and correction
- Features switch-selectable coax line termination for convenience, space and cost saving
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
The iConverter 10T/2 is a 10BASE-T to 10BASE-2 media converter that converts between twisted pair (UTP) and coax LANs and joins their collision domains. The iConverter 10T/2 facilitates the connection of a coax segment to a 10BASE-T hub. When using a pair of iConverter 10T/2 converters back to back, they can connect between two 10BASE-T hubs via coax.
The UTP port has a modular EIA/TIA 568 RJ-45 connector that supports categories 3 to 5 wiring and connects to distances up to 100m. The iConverter 10T/2 detects and corrects wiring polarity reversals, and features a crossover switch that facilitates a straight-through cable connection to a workstation or a hub, eliminating the need for a crossover cable.
The coax port has a BNC connector and supports a 50 ohm cable and distances of up to 185m. Per IEEE 802.3 standard, up to 30 workstations can be attached to the coax segment. The iConverter 10T/2 features a convenient and cost-effective cable termination via a termination switch and a built-in termination element.
The iConverter 10T/2 module is hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. It can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
