性能
接收功率(最大) |
-3 dBmW |
接收功率(最小) |
-30 dBmW |
链路预算 |
15 dB |
发射功率(最小) |
-15 dBmW |
最大传输距离 |
20000 m |
光纤模式结构 |
Single-mode |
发射功率(最大) |
-5 dBmW |
能量控制
输入电压 |
100-240 V |
输入电流 |
0.5 A |
接受频率 |
50/60 Hz |
另外
连接方式 |
Wired |
数据传输率(最大) |
100 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
4 x T1/E1, RJ-48, 10/100BASE-TX, 100BASE-FX, SM, SF, SC, RJ-45, 20km, 1550/1310nm, 15dB, 100 - 240VAC, 2.5 lbs
<b>Features:</b>
- Multiplexes four independent T1 or E1 channels from copper links into one fiber link
- Supports optional multiplexed 10/100 copper Ethernet port with T1/E1 circuits
- Small Form Pluggable (SFP) transceivers or fixed-fiber connectors
- Supports multimode, single-mode dual fiber, single-mode single-fiber, in standard and CWDM wavelengths
- Locally configurable via DIP-switches
- Configurable alarm relay contacts for audio/visual fault notification
- Supports local and remote fiber and copper loop-back modes
- Commercial (0 to 50º C) and wide (-40 to 60º C) operating temperature ranges
- Lifetime Warranty and free 24/7 Technical Support
The iConverter 4xT1/E1 MUX multiplexs up to four T1/E1s and an optional 10/100 Ethernet onto a fiber optic transport link. The unmanaged T1/E1 Multiplexer provides an easy to use and cost effective multi-service solution.
The iConverter 4xT1/E1 MUXes operate in a back-to-back configuration, with one multiplexer at each end of the fiber link. This easy-to-use and cost-effective MUX transports services from legacy TDM equipment across long distances that exceed the reach or capacity of copper. This includes applications such as T1/E1 extension, mobile backhaul and building-to-building PBX connectivity, making it ideal for Enterprise, Telecom and Utility industries.
The 4xT1/E1 MUX supports fixed-fiber and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. The 4xT1/E1 MUX supports multimode, single-mode, single-mode single-fiber, in standard and CWDM wavelengths.
The 4xT1/E1 MUX supports standard T1, E1 and Primary Rate Interface (PRI), voice or data. The MUX also supports AMI, B8ZS and HDB3 line codes. DIP-switches provide easy configuration of the T1/E1 line codes and line build-out.
The copper interfaces feature four RJ-48 connectors for balanced T1/E1 applications. An optional adapter cable is available to convert each RJ-48 interface to a BNC interface for unbalanced E1 transport applications.
The 4xT1/E1 MUX features user-selectable local loop-back on both the copper and fiber ports, remote fiber loop-back and circuit test modes. This functionality facilitates diagnosis of the remote unit, and minimizes the need for test equipment and support personnel at each end of a link. Alarm relay and LEDs provide fault notification for loss of power, LOS and AIS.
The 4xT1/E1 MUX is a compact, unmanaged standalone unit available in both AC and DC models. The AC model accepts AC power input ranging from 100VAC to 240VAC, 50/60Hz, while the DC model accepts 18VDC to 60VDC.