性能
| 光纤模式结构 |
Multi-mode, Single-mode |
| 最大传输距离 |
30000 m |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 连接方式 |
Wired |
SM/MM, ST/ST, ST/SC, SF, 100BASE-FX, 30 km max, 1310 nm
100BASE-FX Single-Mode to Multimode Managed Fiber Converter
- OC-3 multimode to single-mode fiber converter
- Supports multimode, single-mode, and single-fiber with SC and ST connectors
- Supports distances up to 120km or longer
- Support for OC3 over ATM or SONET
- SNMP management via NetOutlook provides real-time port and module information, remote parameter configuration and trap notification
- Management is available with the addition of a management module to the chassis
- User-selectable link fault detection modes facilitate quick fault detection, isolation, and reporting
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
The iConverter OC3FF managed media converter provides multimode to single-mode and dual fiber to single fiber conversion, and is a cost-effective solution for extending fiber network distances.
iConverter OC3FF models are available with multimode, single-mode, and single-fiber options. The multimode fiber port supports ST or SC connectors and distances up to 5km. The single-mode fiber port supports ST or SC connectors and distances up to 120km.
The OC3FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.
The iConverter OC3FF is available as a compact, unmanaged standalone unit, or as a chassis plug-in module that can be managed with a management module installed in the chassis. The hot-swappable plug-in module can be mounted in a high-density 19 or 5-Module chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.
The standalone OC3FF can be wall-mounted and is DC powered. It can be ordered with an external AC/DC power adapter, or it can be directly powered using a 2-pin terminal connector.
