另外
| 连接方式 |
Wired |
| 数据传输率（最大） |
100 Mbit/s |
100BASE-TX, RJ-45, 100m Max
The iConverter Redundant Fast Ethernet modules are designed for use in networks that require fiber or copper link redundancy. With a link fault detection time of 100 microseconds, the Redundant iConverter modules provide the rapid response time required for mission-critical applications.
All ports support Half or Full-Duplex operation, and the UTP ports can auto-negotiate or be manually set to a required duplex mode. The fiber ports are always set to manual mode. All ports in an application must be set to the same duplex mode.
All ports support Link Propagation (Link Loss Carry Forward), Link Segmentation, Remote Fault Detection and Symmetrical Fault Detection modes to facilitate quick fault detection, isolation and reporting.
iConverter Redundant Fast Ethernet modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
