性能
发射功率(最大) |
-4 dBmW |
波长 |
850 nm |
接收功率(最大) |
-3 dBmW |
接收功率(最小) |
-17 dBmW |
链路预算 |
7 dB |
发射功率(最小) |
-10 dBmW |
最大传输距离 |
550 m |
光纤模式结构 |
Multi-mode |
能量控制
接受频率 |
47/63 Hz |
支持以太网(PoE) |
Y |
输入电压 |
100-240 V |
端口 & 界面
光纤通道端口 |
1 |
通过以太网(PoE)供电端口数量 |
1 |
联网
以太网的数据传输率 |
10, 100, 1000 Mbit/s |
另外
以太网路(RJ-45)连接接口数量 |
1 |
连接方式 |
Wired |
数据传输率(最大) |
1000 Mbit/s |
10/100/1000 Media Converter with Power over Ethernet (PoE), MM, SC, 550m
The cost-effective OmniConverter GPoE/SE multi-port media converters provide 10/100/1000BASE-T UTP to 1000BASE-X fiber conversion and support Power-over-Ethernet (PoE). Classified as Power Sourcing Equipment (PSE), the GPoE/SE provides power to a Powered Device (PD) using standard UTP cables that carry the Ethernet data.
The GPoE/SE media converters can power PDs such as VoIP phones, wireless access points, network cameras, building access devices and automation equipment. They are especially useful at powering PDs in hard-to-reach locations with limited access to AC power outlets (ceilings, closets, etc.). The cost of bringing electrical power to each device is eliminated by powering the equipment through the UTP cable.
GPoE/SE media converters support fixed-fiber connectors and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. The products support multimode, single-mode, single-mode single-fiber, in standard and CWDM wavelengths.
Models are available with one or two RJ-45 ports. Each port independently provides up to 15.4W of power to a PD per the IEEE 802.3af specification.
The compact standalone GPoE/SE media converters can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19” rack-mount shelf. The products are DC powered and available with an optional external 100 - 240VAC universal power adapter.