照相机
| 最低照明 |
3 lx |
| 公共网络访问范围 |
60 ° |
| 倾角 |
-45 - 20 ° |
其他功能
| 网路功能 |
Ethernet (10-T/100-TX) |
Indoor Network Camera 640x480, 1/4"
Use of the built-in microphone and a separately purchased amp-equipped speaker enables two-way voice communication (transceiver system) between the network camera and a PC used to monitor the camera image. Voice transmission and reception can be switched easily from the PC used to monitor the image. For example, it allows people in a head office to provide instructions or messages to people on a sales floor while observing the image on their PC.
Simultaneous monitoring of images using up to four network cameras. Images from up to four camera units can be assigned as a group, and the monitor display can be switched to any of three image groups. This enables simultaneous display of the images from up to 12 camera units, with no audio.
The Alarm-Controlled Image Transfer function uses a commercially available external Sensor or switch and sends the image only when there is an action such as turning on the light or opening the door. The Timer-Controlled Image Transfer function automatically transmits images according to the set time zone and the day of the week. These convenient functions eliminate your need to constantly check the image.
The Color Night View Mode brings the minimum light requirement from 3 lx down to 0.2 lx, letting you capture images even in dimly lit places.
The image refreshing speed (maximum) has been increased to 30 images/sec* for smoother displays of moving images. *Image Resolution: 320 x 240 or 160 x 120.
Our new network cameras allow the use of a virtually unlimited number of IP addresses by supporting IPv6, a next generation protocol. The IPv4/IPv6 dualstack feature enables you to use IPv4 at the present and switch over to IPv6 in the future.
