技术细节
接口类型 |
Multimode Simplex |
技术 |
Fiber Optic |
SC OptiCam® Composite Ferrule 50/125μm Multimode Simplex Fiber Optic Connector for 900μm tight-buffered fiber installation
-TIA/EIA-604 FOCIS-3 compliant connectors.
-Exceed TIA/EIA-568-B.3 requirements.
-Insertion loss: 0.3dB average (multimode and singlemode).
-Return loss: >26dB (10Gig™ multimode), >20dB (multimode), >50dB (singlemode).
-Quick installation; provide field termination in less than half the time of field polish connectors.
-Patented re-termination capability provides yield rates approaching 100%.
-Factory pre-polished fiber endface eliminates time-consuming field polishing to reduce installation costs, labor, scrap and the number of tools required.
-Cam activated fiber and buffer clamp mechanisms provide superior fiber and buffer retention – less sensitivity to fiber tensile loading.
-No separate clamps, tools, or steps are required to secure both the fiber and the buffer.
-OptiCam® Termination Tool simplifies tooling and termination, and virtually eliminates operator error by providing visual indication of proper termination after the cam step has been completed.
-Cable retention boot assemblies consistently provide higher than industry standard cable retention.
-Non-optical disconnect maintains data transmission under tensile loads for jacketed cable.
-Fiber cable size: accept 900μm tight-buffered fiber with included boot(s); accept 1.6mm – 2.0mm and 3.0mm jacketed cable with available OptiCam® Cable Retention Boot Assemblies (ten per package).
-For 250μm coated fiber termination, use 250 micron fiber build-up tube kit or fan-out kits.
-Ferrule type: 2.5mm zirconia ceramic (highest durability for repeated matings) or composite to meet a variety of application requirements.
-Use OptiCam® Termination Kit (FCAMKIT).