管理功能
支持多重播放 |
Y |
支持管理信息基本原则 |
Y |
系统事件日志 |
Y |
流量分类 |
Y |
流量调整 |
Y |
支持服务质量(QoS) |
Y |
重启按钮 |
Y |
网上管理 |
Y |
数据传输
MAC 地址表 |
8000 entries |
存储转发 |
Y |
VLAN 数量 |
4000 |
环境条件
散热 |
11.6 BTU/h |
工作高度 |
0 - 3048 m |
光纤
光纤类型 |
Multi-mode |
传输距离(最大) |
2 km |
波长 |
1310 nm |
联网
端口镜像 |
Y |
广播风暴控制 |
Y |
VLAN支持 |
Y |
IGMP侦听 |
Y |
自动 MDI / MDI - X 检测功能 |
Y |
生成树协议 |
Y |
支持 MAC 地址自动学习(auto-learning)功能 |
Y |
流量控制支持 |
Y |
动态主机配置协议客户 |
Y |
动态主机配置协议服务器 |
Y |
自动检测 |
Y |
10G支持 |
N |
全双工传输 |
Y |
端口 & 界面
基本交换 RJ-45 以太网端口数量 |
4 |
光纤通道端口 |
1 |
基本交换 RJ-45 以太网端口类型 |
Gigabit Ethernet (10/100/1000) |
控制台端口 |
RJ-45 |
4 x 10/100/1000Base-T RJ-45, 1 x 1000Base-LX, 1310nm, multimode, duplex SC, -10 to 60C
The IDS-205G is a 5 port Managed Ethernet Switch that can operate in industrial environments providing advanced performance and enabling real-time deterministic network operation. Four 10/100/1000-Base-T Ethernet ports are available for networking Gigabit and Fast Ethernet devices. One 1000Base-X fiber connection is available to extend Gigabit Ethernet operating distances over fiber.
In industrial plants, where high levels of electromagnetic interference ( EMI ) is a common phenomenon, utilizing fiber is critical. EMI can cause data corruption over copper-based Ethernet links. However, data transmitted over fiber optic cable is completely immune to this type of noise ensuring optimal data transmission across the plant floor.
Perle Industrial-grade Ethernet Switches are designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, government, military, oil and gas, mining and outdoor applications.
With over 30 models, the Perle IDS-205G offers a choice of connectors, fiber types, temperature support and operating distances.
The simple Plug and Play installation available in Perle’s Fast Setup feature gets your Ethernet devices networked immediately. CCNA ( Cisco Certified Network Associate ) and CCNP ( Cisco Certified Network Professional ) trained engineers will appreciate the familiar Command Line Interface ( CLI ) via in-band Telnet or the out-band serial console port.
An IPv6 address can be used to manage the IDS-205G which also supports a comprehensive set of management functions, such as P-Ring, management VLAN, QoS, RMON, N:1 port mirroring and local alert log.
These rugged fan-less switches that are hardened to provide superior reliability in -10 to 60°C. In addition, every component on every industrial (XT) model has been designed and tested to handle operating temperatures between -40 and 75C.
All Perle Industrial Ethernet Switches only use high-end components from the leading chip manufacturers to ensure the highest level of durability and reliability. In addition, all units have a corrosion resistance aluminum case and dual redundant power input with reverse polarity and overload protection.
For over 35 years Perle has been designing industrial hardware. This expertise was used to design the toughest Ethernet switches on the market that will keep your system running for years to come.