技术细节
| 适用房间最大面积 |
25 m² |
| 速度调节设置 |
3 |
| 风扇速度指示 |
Sleep, 1, 2 |
| 空气质量传感器 |
Humidity |
| 空气净化能力 |
N |
| 加湿容量 |
225.52 ml/hr |
| 蒸发技术 |
Natural |
| 可移动过滤器 |
Y |
| 过滤 |
Y |
| 主体 |
Plastic |
| 水箱容积 |
2 L |
| 电缆长度 |
1.6 m |
| 噪音水平 |
34 dB |
| 控制类型 |
Buttons |
| 原产地 |
China |
重量和尺寸
| 深度 |
249 mm |
| 宽度 |
249 mm |
| 高度 |
339 mm |
1.6 m, 34 dB, 25 m², 110 V, 2 L, white
Hygienic humidification
Better air starts with your humidifier
Breathe easier with the assistance of the Philips Humidifier Series 2000. NanoCloud evaporative technology spreads 99% less bacteria* vs. leading ultrasonic humidifiers and prevents wet spots and white dust.* Perfect for bedroom or nursery.
NanoCloud technology
- Natural evaporation process
- Prevents the spreading of bacteria
- Prevents wet spots and white dust
- No hot water
Smart controls
- Automatic humidity settings
- Quiet sleep mode
- Timer
- 2 fan speeds
Easy to Maintain
- Easy-to-fill tank
- Easy-clean design
Natural evaporation process
NanoCloud technology uses a natural evaporation process, which draws in dry air, adds water molecules to the air, and emits humidified air into the room.
Spreads less bacteria*
Once the water is evaporated, the water mist becomes invisible and the smaller molecules are less able to carry bacteria into the air. Our laboratory testing confirms that NanoCloud technology spreads 99% less bacteria than leading ultrasonic humidifiers.
Prevents wet spots&white dust*
With its 360° design, the humidifier distributes the humidified air evenly throughout the room, preventing wet spots on the floor or surface. The NanoCloud technology also reduces the risk of spreading minerals into the air, thereby preventing white dust on furniture and surfaces.
No hot water
NanoCloud technology does not heat water, preventing the risk of burns from hot water or warm steam.
Automatic humidity settings
Maintain a constant humidity level with the automatic humidity settings. Choose 40%, 50%, or 60% as your target humidity level, and the humidifier will automatically turn on or off to reach the desired humidity level. The Smart Humidity sensor enables the appliance to manage the humidity level. The numerical display also shows you the current humidity level in the room.
Quiet sleep mode
In sleep mode, the humidifier runs at minimum noise level and all lights are off except for the speed indicator. This setting ensures you can maintain your desired humidity level even when you are sleeping.
Timer
When using the timer, the humidifier operates for a set number of hours and automatically switches off when the set time has elapsed. Set the humidifier for 1, 4 or 8 hours.
2 fan speeds
The Philips Humidifier Series 2000 has 2 fan speeds and a humidification rate of 1.43 Gallons/24hours (225.52 ml/hr) on the highest fan setting. It is perfect for smaller rooms in the house, such as a bedroom, office or nursery.
Easy-to-fill tank
Fill with a jar or bring the water tank to the tap. The 'max' indicator shows how far to fill the tank. When the tank is empty, the humidifier automatically shuts off and the display indicates a re-fill is needed.
Easy-clean design
A round and minimalist design makes cleaning easy. This humidifier does not have a heating plate, so descaling is not required.
* Prevents wet spots and white dust: Independent third-party test Determination of deposition of minerals from liquid droplets on furniture according to DIN 44973, IUTA e.V. To determine mineral deposits onto furniture from airborne liquid droplets over a period of 3 hours.
* Up to 269 sq ft/25 m2: Room size is calculated based on humication rate tested by third party lab, following AHAM HU-1-2006 (R2011)
* Results are based on emission of the bacterium Pseudomonas Fragi from clean units and filters, after 1,6 and 24 hours of continuous use, varying in water consumption from 30-120ml/hr, using sterilized water spiked with said bacterium, conducted in a 1m3(35cuft) chamber refreshed at 560L/min (148gpm)
