技术细节
| 视频头数量 |
4 |
| 用户手册 |
Y |
| 规划期 |
12 month(s) |
| 复卷时间E - 180 |
70 s |
| 磁头清洁 |
Auto |
| 磁带速度选择 |
Y |
| 语言支持 |
DEU, DUT, ENG, ESP, FRE, ITA, SWE |
| 深度 |
22 mm |
| 手持式遥控器 |
Y |
| 集成时钟 |
Y |
| 可编程事件 |
8 |
| 频道/通道 数量 |
99 channels |
| 模拟信号系统 |
NTSC, PAL, SECAM |
| 支持波段 |
UHF, VHF |
| 视频记录模式 |
LP, SP |
重量和尺寸
| 尺寸（宽 x 深 x 高） |
435 x 226 x 93 mm |
| 重量 |
2600 g |
SECAM/PAL/NTSC, CVBS, UHF/VHF, 2.6 kg
Digital Studio Picture Control
Digital Studio Picture Control optimizes playback picture
Smart Picture
Smart Picture provides the optimum picture settings for color, brightness, saturation, contrast, sharpness, and so on, to enhance your overall viewing experience at all times
NTSC Playback
Plays tapes recorded in NTSC on your PAL TV
Turbo Drive
Turbo Drive means speed, reliability and intelligence
Follow TV
The video recorder or DVD recorder matches the stations and presets of your TV. Analogue: A signal comparison is made between TV and recorder via SCART cable. The user has to select every present available in his TV set. Digital: The resorting is done fully automatically.
VPS/ PDC
With ’VPS’ (Video Programming System) and ’PDC’ (Program Delivery Control), the TV station controls the beginning and the length of the programmed recording. This means that your recording device switches itself on and off at the right time even if a TV program you have programmed begins earlier or finishes later than expected
Automatic Long Play Recording
Automatically selects Long Play if insufficient tape is left
Front A/V Connectors
Front A/V Connectors mean no crawling behind the set
ShowView
With the ShowView system, all you need to do to program your video recorder is to enter the ShowView number – a single code of up to nine digits (but usually less) that is printed next to each TV program in most TV guide
Turbo Timer
Turbo Timer is the fastest way to program a recording timer
Record Link
When you want to record a programme from your satellite receiver or any other external device just activate the "Record Link", put the set in standby and programme the desired timer on your satellite receiver. Upon activation of the satellite receiver, the set will start the recording simultaneousl
