重量和尺寸
| 宽度 |
94 mm |
| 深度 |
81 mm |
| 重量 |
220 g |
| 高度 |
26 mm |
联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 以太网的数据传输率 |
10, 100 Mbit/s |
| 以太网接口类型 |
Fast Ethernet |
| 以太网光缆技术 |
100BASE-FX |
| 网络标准 |
IEEE 802.3, IEEE 802.3u |
| 以太网铜缆技术 |
100BASE-TX |
| 数据传输速度 |
100 Mbit/s |
能量控制
| 输入电压 |
5 V |
| 功耗（一般操作） |
6.2 W |
| 输入电流 |
2 A |
性能
| 可支持的光纤电缆直径 |
62.5/125 µm |
| 光纤模式结构 |
Multi-mode |
| 最大传输距离 |
2000 m |
| 波长 |
1550 nm |
环境条件
| 运行湿度范围(H-H) |
5 - 90% |
| 储存温度范围 (T-T) |
-40 - 70 °C |
| 储存相对湿度范围（H - H） |
5 - 90% |
另外
| 产品色彩 |
Black |
| 数据传输率（最大） |
200 Mbit/s |
| 连接方式 |
Wired |
| 以太网路(RJ-45)连接接口数量 |
1 |
| 运行温度范围（T - T） |
0 - 50 °C |
10/100Base-TX to 100Base-FX (ST, MM) Smart Media Converter-2km
Distance Extended with Fiber Optic Cable
PLANET FST-80x Smart Media Converter series provides media conversion between 10/100BASE-TX and 100BASE-FX interfaces, such as multi-mode ST/SC connectors (2km), single-mode SC connector (15/35/50km) and single fiber connector using the wavelength-division multiplexing (WDM) technology (20/60km) to enable to extend links over long distances using fiber optic cable.
Enhanced Smart Management Features
The FST-80x series provides auto MDI/MDI-X on their TP port and store-and-forward mechanism to eliminate faulty packets. Use the DIP switch from the FST-80x to configure the available smart functions, such as the half/full duplex, auto-negotiation / force and 10/100Mbps options for TP and fiber interfaces. Besides, the Link Loss Return (LLR) and Link Loss Carry Forward (LLCF) functions can immediately alarm network administrator once there is a media link issue, thus helping to monitor the status of the entire network.
Easy Installation
The FST-80x series can be connected easily and cost-effectively as these smart media converters can be used as a standalone unit when powered on by its DC adapter, or used as a slide-in module connected to PLANET 19-inch, 16-slot web smart/managed media converter chassis (MC-1600MR/MC-1600MR48 and MC-1610MR/MC-1610MR48). When working with the web smart/managed media converter chassis, the status of the FST-80x can be monitored via the local RS-232 console and remote web interface.
