数据传输
| MAC 地址表 |
2048 entries |
| 存储转发 |
Y |
| 交换容量 |
1 Gbit/s |
| 吞吐量 |
0.74 Mpps |
环境条件
| 散热 |
31 BTU/h |
| 运行湿度范围(H-H) |
5 - 90% |
| 储存温度范围 (T-T) |
-40 - 85 °C |
| 储存相对湿度范围（H - H） |
5 - 90% |
联网
| 流量控制支持 |
Y |
| 自动 MDI / MDI - X 检测功能 |
Y |
| 支持 MAC 地址自动学习（auto-learning）功能 |
Y |
| 支持 MAC 地址自动年龄更新（auto-aging）功能 |
Y |
| 网络标准 |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| 10G支持 |
N |
| 全双工传输 |
Y |
能量控制
| 冗余电源(rps)支持 |
Y |
| 功耗（一般操作） |
9.1 W |
端口 & 界面
| 光纤通道端口 |
1 |
| 基本交换 RJ-45 以太网端口数量 |
4 |
| 快速以太网（铜缆）端口数量 |
4 |
| 基本交换 RJ-45 以太网端口类型 |
Fast Ethernet (10/100) |
| 以太网铜缆技术 |
100BASE-TX, 10BASE-T |
设计
| DIN导轨安装 |
Y |
| 外壳材料 |
Metal |
| 液晶显示器指示灯 |
Y |
| 国际保护（IP）代码 |
IP30 |
| 认证 |
FCC, CE\nUL, cUL |
| 墙壁支架 |
Y |
| 机架安装 |
N |
光纤
| 光纤类型 |
Multi-mode |
| 接收器灵敏度 |
-34.5 dB |
| 传输距离（最大） |
2 km |
| 以太网光缆技术 |
100BASE-FX |
| 波长 |
1300 nm |
重量和尺寸
| 深度 |
97 mm |
| 重量 |
436 g |
| 宽度 |
135 mm |
| 高度 |
32 mm |
性能
| Auto-negotiation 自动协商功能 |
Y |
另外
| 产品色彩 |
Black |
| 运行温度范围（T - T） |
-10 - 60 °C |
Unmanaged Industrial Ethernet Switch, 4 x Fast Ethernet RJ-45, 1 x 100FX, Multi-Mode, 2km Max
New slim type with more practicability and convenience
PLANET has released the ISW-511 / ISW-511S15, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. They each are equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-511 has one 100Base-FX multi-mode SC interface for transmission distance up to 2km, and the ISW-511S15 has one 100Base-FX single-mode SC interface for transmission distance up to 15km. Both of them operate reliably in Heavy Industrial demanding environments. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.
Stable Operating Performance under Difficult Environments
The ISW-511 / ISW-511S15 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-511 / ISW-511S15 can be placed in almost any difficult environment. The ISW-511 / ISW-511S15 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.
Robust Switch performance
The ISW-511 / ISW-511S15 each provides four 10/100Base-TX Ethernet ports and one 100Base-FX optic-fiber SC interface, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The Flow Control function allows the ISW-511 / ISW-511S15 for fast and reliable data transfer.
All of the RJ-45 copper interfaces in the ISW-511 / ISW-511S15 support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
