联网
布线技术 |
10/100/1000Base-T |
以太网的数据传输率 |
10, 100, 1000 Mbit/s |
以太网接口类型 |
Gigabit Ethernet |
支持以太网(PoE) |
Y |
遵守工业标准 |
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3at |
能量控制
功耗(一般操作) |
30 W |
支持以太网(PoE)电源供应 |
56 V |
电源转换器频率 |
50/60 Hz |
电源转换器输入电压 |
100 - 240 V |
输入电流 |
0.53 A |
重量和尺寸
尺寸(宽 x 深 x 高) |
95 x 70 x 25 mm |
重量 |
83 g |
环境条件
储存温度范围 (T-T) |
-10 - 70 °C |
运行湿度范围(H-H) |
5 - 95% |
产品特点
液晶显示器指示灯 |
Y |
认证 |
FCC Part 15 Class A, CE |
另外
以太网路(RJ-45)连接接口数量 |
2 |
运行温度范围(T - T) |
0 - 50 °C |
IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-Span)
PLANET Technology has announced a complete IEEE 802.3af Power over Ethernet Injector solution to filling flexible powering demand from various Ethernet environments where power outlets are hard to find. Now, PLANET has releases the next generation Power over Ethernet Injector, POE-161, with brand-new IEEE 802.3at High Power over Ethernet technology applied. The POE-161 provides the following key features:
- IEEE 802.3at Power over Ethernet stanard compliant
- Maximum 30W output power support
- 10/100/1000Mbps duplex mode support
The POE-161 is a Single-Port, Mid-Span IEEE 802.3at High Power over Ethernet Injector with maximum up to 30 watts of power output over Ethernet cables. It is designed specifically to fill the demand of the growing higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen / video and voice over IP (VoIP) telephones, multi-channel (11a / b / g / n) wireless LAN access points and other network devices that need higher power to function normally. The POE-161 High Power Injector is an ideal solution to delivering data and power to network devices directly via the RJ-45 Port interface without the need of installing extra power outlets and electrical cabling.
Quick and Easy High Power PoE Network Deployment
The POE-161 is a Mid-Span IEEE 802.3at Gigabit High Power over Ethernet Injector which provides DC 56V over Ethernet cables. The POE-161 inserts DC voltage into Cat.5/5e/6 cable, allowing the cable between the Injector (POE-161) and Splitter (POE-162S) to transfer data and power simultaneously for up to 100 meters. The POE-161 delivers the Ethernet digital data with power over the twisted pair cables as an IEEE 802.3at Gigabit High Power over Ethernet Injector, and the connected IEEE 802.3at Gigabit High Power over Ethernet splitter will spilt the digital data and the power into two selectable DC outputs (12VDC / 24VDC).
Cost effective and Easy Cabling Installation
With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator can use only one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, by connecting to the high power PoE splitter POE-162S, the POE-161 can offer benefits of cost saving, easy networking planning and high reliability. Upon the installation of IEEE 802.3at compliant devices, the POE-161, when functioning with the POE-162S, can keep the connection while migrating or splitting the power and the Ethernet digital packets. It thus reduces cables, eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place, and most of all, reduces installation time. The high Power over Ethernet solution frees the Security IP Camera and wireless AP deployment from restrictions of power outlet locations.