重量和尺寸
产品尺寸时开放 (宽x深x高) |
460 x 460 x 390 mm |
唱盘直径 |
300 mm |
唱盘重量 |
2000 g |
产品尺寸 (宽x高x深) |
460 x 133 x 360 mm |
2 Xperience Acryl, 2M Red, 33/45 rpm, 10 - 30mN, -70dB, 2kg/300mm, 2W, 7600 g, White/Black
<b>2 Xperience was developed from the now legendary Pro-Ject 2. This balanced and low-resonance </b>design is a perfect combination of sandwich construction, acrylic chassis, MDF platter with vinyl mat and the Pro-Ject 9cc top class tone-arm made from carbon fibre. Decoupled motor and conical feet with Sorbothane® inlay are approved Pro-Ject features to eliminate unwanted vibrations.
<b>Turntable</b>
- A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
- The transparent acrylic plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
- The motor is decoupled from the plinth to reduce vibration transmission.
- The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.
- The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing.
- Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.
- External power supply avoids potential electro-mechanical interference.
<b>Tonearm 9cc</b>
- As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
- The headshell and armtube are fashioned from a single piece of carbon-fibre.
- Conical armtube avoids standing wave reflections.
- Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
- Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
- Design of counterweight effectively counteracts unwanted resonances.
- The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
- Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
- Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- Silicone-damped armlift can be adjusted to suit working height of the arm.
- The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.