技术细节
| 额定转速 |
45, 78, 33 RPM |
| 类型 |
Belt-drive audio turntable |
| 抖晃度 |
0.08% |
| 输出电压 |
5.5 mV |
| 方位角 |
Y |
| 操作 |
Manual |
能量控制
| 电源转换器输入电压 |
100 - 110 V |
| 电源转换器频率 |
50/60 Hz |
| 电源类型 |
AC |
重量和尺寸
| 唱盘直径 |
300 mm |
| 唱盘重量 |
1750 g |
| 产品尺寸 (宽x高x深) |
371 x 145 x 300 mm |
RPM 5.1, 22.86 cm (9 ") (230mm), 33 / 45 / 78 r.p.m., -70dB, 1,75kg/300mm, 16V/500mA AC, 2W
- Chassis piano-lacquered dark grey
- A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
- The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.
- The motor is decoupled from the plinth to reduce vibration transmission.
- The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre platter, a cork mat (a standard felt mat is supplied also) and a screw-down record clamp.
- The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing.
- Central metal block optimises centre of gravity and damps main bearing.
- Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.
- External power supply avoids potential electro-mechanical interference.
- As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
- The headshell and armtube are fashioned from a single piece of carbon-fibre.
- Conical armtube avoids standing wave reflections.
- Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
- Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
- Design of counterweight effectively counteracts unwanted resonances.
- The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
- Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
- Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- Silicone-damped armlift can be adjusted to suit working height of the arm.
- The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
