技术细节
抖晃度 |
0.06% |
额定转速 |
45, 33 RPM |
类型 |
Belt-drive audio turntable |
输出电压 |
5.5 mV |
方位角 |
Y |
操作 |
Manual |
能量控制
电源转换器输入电压 |
100 - 110 V |
电源转换器频率 |
50/60 Hz |
电源类型 |
AC |
重量和尺寸
唱盘直径 |
300 mm |
唱盘重量 |
3500 g |
产品尺寸 (宽x高x深) |
440 x 180 x 325 mm |
RPM 9.2 Evolution, 33 / 45 r.p.m, 22.86 cm (9 ") (230mm), -73dB, 10 - 35mN, 3.5kg/300mm, 2W
- Chassis and motor housing piano-lacquered dark grey
- A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
- The medium density fibre plinth rests on three individually height-adjustable magnetic field feet.
- A supplied spirit level allows easy adjustment. Granulate filled plinth guarantees constant damping.
- The motor is mounted in a separate metal housing to eliminate vibration transmission.
- The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg and a brass record puck.
- The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.
- Central metal block optimises centre of gravity and damps main bearing.
- Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.
- External power supply avoids potential electro-mechanical interference.
- The headshell and armtube are fashioned from a single piece of carbon-fibre.
- Conical armtube avoids standing wave reflections.
- Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
- Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances.
- Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
- The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g
- Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
- Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- Silicone-damped armlift can be adjusted to suit working height of the arm.
- The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.