性能
无线局域网连接 |
N |
支持的遥控数量 |
2 |
警钟分贝 |
125 dB |
同时连接的设备数(最大值) |
2 |
智能手机远程支持 |
N |
LCD 2-Way Remote Start Security System, Advanced Impact Sensor
<b>Vehicle Security</b>
The PWD901 is the new bread and butter of the Pyle Vehicle Security line-up. With a built-in relay for parking lights, two auxiliary outputs plus many programmable features, this system offers top notch performance on a smaller budget. With the PWD901 you just get more without paying more.
Secure your vehicle and gain the benefits of a wireless security system, controllable by remote. This kit includes two 4-button transmitters, a status indicator LED, valet/override switch, dual stage impact detector, and anti-carjack functions - everything you've come to expect from a modern vehicle alarm system. Alert yourself and scare off would-be car burglars with the 125dB two-tone siren. Activate remote chirp to find your car in a crowded garage. Choose passive or active arming depending on the situation.
<b>Remote Transmitters</b>
Each transmitter button has two operating modes: standard and level shifted. Pressing a transmitter button for less than one second activates the standard function associated with that button (such as arm or disarm). Pressing a button for more than one second changes the color of the standard transmitter’s LED to green and activates the level shift feature. While the LED is green (level shifted), pressing any transmitter button accesses another level of commands providing expanded operation.
<b>Ignition Controlled Locks</b>
The ignition controlled locks feature allows the doors to automatically lock when the brake pedal is pressed (after turning on the ignition and closing all doors), and automatically unlock when the ignition key is turned off. The ignition controlled locking feature may also be programmed for ignition lock without ignition unlock, and off (no ignition control).
<b>Anti-Carjack Feature</b>
When selected, the optional anti-carjacking feature monitors the vehicle’s doors while the ignition is on. If a door is opened, the anticarjacking feature will trigger, with progressively higher levels of alert. The Anti-Carjacking feature must be enabled during installation.
<b>Remote Engine Shutdown</b>
If the vehicle has been remotely started and you desire to turn the vehicle off, simply press and hold button 2 for level shift, then press button 2 again. After the motor has turned off the doors will relock. This feature must be programmed during installation.
<b>Additional Features</b>
- Tamper Alert
- 125 db Siren
- Starter Defeat
- Auxiliary Output
- Remote Valet Mode
- Remote Panic Mode
- Non-Volatile Memory
- Remote Chirp Defeat
- LED Status Indicator
- Remote Engine Start
- Remote Sensor Bypass
- Passive or Active Arming
- One 2-way LCD Transmitter
- Extended Range Transceiver
- Encrypted Coded Transmission
- Ignition controlled Door Lock/Unlock
- One 4-Button Water Resistant Transmitter
- Automatic Sensor Bypass for Defective Zones
- Electronic Impact Sensor with light Impact Response