扬声器
| 低音炮 |
Y |
| Subwoofer driver diameter (imperial) |
1.75 " |
| 低音炮 寸法 |
12 " |
| 驱动程序数量 |
1 |
| 扬声器数量 |
1 |
| 低音单元驱动器数量 |
1 |
| 推荐使用 |
DJ |
| Woofer diameter |
304.8 mm |
| Driver diameter |
44.45 mm |
音频
| 峰值音乐输出功率（PMPO） |
2000 W |
| 灵敏度 |
131 dB |
| 频率范围 |
48 - 20000 Hz |
| 阻抗 |
40 Ω |
Multipurpose 2-way, 30.48 cm (12 ") cone transducer, 48 Hz - 20 kHz, 131 dB, 1000 W, 18.6 kg, Black
K12 features include:
- 12” Woofer; 1.75” diaphragm compression driver
- 75° Nominal coverage angle
- Maximum SPL 131 dB peak
- 1000-watt continuous Class D power modules in all models
- Onboard mixer with two combo XLR and 1/4” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
- Extensive DSP enhances system performance
- DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
- Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
- DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
- GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
- Attractive and professional appearance
- Rugged ABS enclosures
- Functions as a monitor wedge
- 16-gauge powder coated steel grille
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points
- Eyebolt and yoke mount accessories available
