联网
| 自动 MDI / MDI - X 检测功能 |
Y |
| 全双工传输 |
Y |
| 10G支持 |
N |
端口 & 界面
| 快速以太网（铜缆）端口数量 |
8 |
| 基本交换 RJ-45 以太网端口类型 |
Fast Ethernet (10/100) |
| 基本交换 RJ-45 以太网端口数量 |
8 |
| 以太网铜缆技术 |
100BASE-TX, 10BASE-T |
8-P Fast Ethernet Switch
The device provides a network with five or eight new and independent bandwidths speed Nway ports with TP. Every port provides a built-in Auto-negotiation function that automatically senses for the widest possible bandwidth (10Mbps - 200Mbps), then instantly sets the port to operate at that speed. In addition, each port provides its own independent bandwidth. This means users can instantly add 5/8 new bandwidths by simply attaching network cabling. This combination provides networks with the utmost in hardware flexibility. The device is a Plug-n-Play Switch, no confusing configuration is needed. The Switch offers a user friendly design with all status LEDs conveniently located on the front panel, and TP ports neatly placed along the back panel. To instantly add five/eight new bandwidths, or to upgrade the performance of any network.
- 5/8 ports Switched ports with Auto-negotiation function.
- Full wire speed "Store-and-Forward" technology instantly eliminates bad packets.
- Filtering/Forwarding Rate: 148,800 packets/sec. per port Max.
- IEEE 802.3x Flow Control support for Full Duplex operation.
- Back-Pressure support for Half Duplex operation.
- IEEE 802.3u and 802.3 standards comply.
- Plug-n-Play with easy to read diagnostic LEDs.
- 5/8 ports Auto MDI-X detect and correct crossover cables.
