性能
麦克风频率 |
80 - 11000 Hz |
集成答录机 |
Y |
类型 |
DECT telephone |
重量和尺寸
基座尺寸 |
180 x 153 x 32 mm |
基座重量 |
302 g |
FLX 2 Analog POTS System w/ two Wearable Microphones
Congratulations on your purchase of the Revolabs FLX2 Wireless Conference Phone. This system utilizes state of the art technology providing high bandwidth audio and enabling clear, reliable, untethered communications with your telephone, PC, mobile device, and video conferencing system.
The Revolabs FLX2 Conference Phone provides enhanced freedom for telephone and video conferences by allowing independent locations of the microphones and the speaker during the call.
Unpacking
Your Revolabs FLX2TM Conference Phone package contains the following items. When unpacking the system be sure to take inventory of all parts to ensure that nothing is missing. If parts are missing, please contact your retailer.
Revolabs FLX2 Conference Phone components are partially charged. Please charge the Speaker, the Microphones, and the Dialer for at least 8 hours or overnight before using the system.
The Revolabs FLX2 Conference Phone comes with two different power supplies. Please ensure that you use the correct power supply when connecting the Base Station and the Charger Base.
Connecting the Base Station
Place the Base Station close to the analog telephone outlet you want to use for the conference phone.
Connect the Base Station to the telephone network using the provided RJ 11 Telephone cable. Use the 5 Volt power supply to connect the Base Station to the power outlet. The Base Station will power up.
Connecting the Charger Base
Place the Charger Base at a location where you can easily access the Microphones and the Speaker for your conference calls, e.g. on a side board, a desk, or the conference table.
Connect the Charger Base to the power outlet using the provided 12-15V power supply.
Place the Speaker, the Microphones, and the Dialer in the respective openings of the Charger Base to charge them.
The Dialer and Speaker will automatically connect to the Base Station after a short time if it is powered up. You will hear a confirmation chime from the Speaker once the system is ready for use. The Microphones only connect when taking out of the Charger Base, or if the multi-function
button is pressed while in the Charger Base. If the Speaker or the Dialer are not powered up, take them out of the Charger Base for a few seconds and put them back in. This will switch on the component.