性能
警报器输入/输出 |
Y |
日/夜模式 |
Y |
PTZ控制(平移/倾斜/缩放) |
Y |
类型 |
IP security camera |
聚焦系统
光学变焦 |
3.6 x |
数字变焦 |
16 x |
焦距 |
2.8 - 10 mm |
照相机
相机快门速度 |
1/50 s |
最低照明 |
0.0003 lx |
公共网络访问范围 |
0 - 340 ° |
倾角 |
0 - 146 ° |
另外
以太网连接器 |
N |
连接方式 |
Wired |
自转 |
340 ° |
1/3" Super HAD CCD, 600 TV Line, Zoom 3.6x, 52dB, RS-485, IP66, 5W, 1.3 kg
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
Nothing appears on the screen.
- Check that the power cord and line connection between the camera and monitor are fixed properly.
- Check that you have properly connected UTP cable or BNC cable to the camera.
The image on the screen is dim.
- Is lens stained with dirt? Clean your lens with soft, clean cloth.
- Set the monitor to proper condition.
- If the camera is exposed to too strong light, change the camera position.
The image on the screen is dark.
- Adjust the contrast feature of the monitor.
- If you have an intermediate device, set the 75Ω / Hi-z properly.
The camera is not working properly, and the surface of the camera is hot.
- Check that you have properly connected the camera to an appropriate power source.
The SENS-UP function does not work.
- Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
- Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
The Motion Detection function does not work.
- Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
Color is not correct.
- Check the setting of WHITE BAL SETUP menu.
The screen flickers continually.
- Check that direction of camera turns toward the Sun.
When coaxial communication is not available:
- Make sure that the camera and monitor are installed within the recommended distance.
- Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded.