磁盘驱动器
| 单磁道搜索时间(读/写) |
0.8 ms |
| 平均等待时间 |
4.17 ms |
| 硬盘平均寻找时间 |
8.9 ms |
| 驱动器就绪时间 |
10 s |
| 全程查找 |
18 ms |
| 硬盘容量 |
500 GB |
| 硬盘转速 |
7200 RPM |
| 传动装置,缓冲区大小 |
16 MB |
| 每扇面字节数 |
512 |
| 启动/停止周期 |
50000 |
Spinpoint T166 500GB, 7.200 rpm, SATA, 16MB
Serial ATA
SATA is a computer bus technology primarily designed for transfer of data to and from HDDs and optical drives.
It uses only 4 signal-lines, allowing for much more compact cables compared to PATA.
device initiated power management
When there are no commands on the HDD, this feature automatically switches on power saving mode and cuts down on electricity through the SATA cable.
It can effectively reduce power consumption.
SATA Native Command Queuing(NCQ) feature set
SATA NCQ is created to improve the HDD performance by re-ordering the commands sent by the computer to the HDD.
enable/disable staggered spin-up
Staggered spin-up of HDD is not confined solely to mobile drives, and is a feature of many multi-drive systems using RAID.
This feature allows not only greater reliability, but also the system to avoid power surges if all of the HDDs spin up simultaneously during system power up (in a multi-drive environment).