读取速度
CD-R 读取速度 |
40 x |
CD-RW 读取速度 |
40 x |
CD-ROM读取速度 |
48 x |
CD读取速度 |
40 x |
写入速度
CD-R写入速度 |
48 x |
CD-RW 写入速度 |
16 x |
CD写入速度 |
48 x |
CD重写速度 |
48 x |
设计
內置式 |
Y |
Disc loading type |
Tray disc loader |
其他功能
支持的介质类型 |
CD-DA/ROM/ROM XA/Plus/Extra/Photo/Video/Enhanced/I/FMV/R/RW/TEXT |
SW-248BEN, CD-RW, ATAPI BUS, 770g, white
Front:
1. Headphone Connector
Connector for stereo headphones with a 3.6 mm stereo mini-jack.
2. Headphone volume control
This headphone volume control adjusts the volume for your headphones. You can only use the
headphone jack and volume control when you have installed the required software utilities. For example, the Microsoft Windows Media player can be used.
3. Emergency eject hole
if the compartment does not open when you press the Eject button, power off the computer, insert a pin or unfolded paper clip in the hole and push firmly
4. LED
Indicator Light. (GREEN: Read, RED: Record)
5. Eject button
6. Disc compartment
the compartment opens and closes automatically when you press the Eject button.
Rear:
1. Digital output terminal
You can connect a sound card or MPEG card which support Digital output terminal to your drive using this two-pin terminal.
2. Sound output terminal
You can connect a sound card to your drive using this four-pin terminal.
This function is not covered in detail in this guide. Refer to the documentation supplied with your sound card.
3. Master/slave select terminal
Usually, this is a pre-set configuration as illustrated below.
Verify that the setting is as illustrated. If it is not, simply remove the jumper and place it in the correct position.
4. Interface terminal
This input/output interface terminal is used to connect the 40-pin flat cable from the IDE interface to the CD-R/RW drive.
5. Power terminal
The power terminal is a four-conductor male plug.
(A : +5V DC)
(B : +12V DC)