性能
| 内存类型 |
SLC |
| 读取速度 |
520 MB/s |
| 写入速度 |
415 MB/s |
| 固态磁盘驱动器的容量 |
128 GB |
| 总写入字节（TBW） |
72 |
| 随机写入（100％量程） |
40000 IOPS |
| 随机读取（100％量程） |
73000 IOPS |
X300 128GB SSD M.2 2280
RELIABLE AND RESPONSIVE PERFORMANCE WITH LOW POWER
Based on state of the art 1Ynm X3 flash technology, the SanDisk X300 SSD SATA SAS PCIe delivers performance with high reliability and low power. It features nCache™ 2.0, SanDisk’s next generation tiered caching technology, designed to improve SSD responsiveness for most corporate and consumer workloads.
The X300 is highly versatile and can accommodate a wide range of computing platforms. It is available in 2.5” 7mm cased, M.2 2280, and mSATA form factors with capacities of 128GB, 256GB, 512GB, and 1TB*.
nCache 2.0 Technology
nCache 2.0 uses a combination of SLC and X3/TLC flash blocks to improve endurance, increase efficiency, and boost performance. By first writing all of the data to SLC blocks, the write amplification on the X3 blocks is minimized.
DataGuard Client
The X300 SSD also includes a new and robust on-the-fly error handling mechanism called DataGuard Client. It uses page-level striping with distributed parity for an added layer of data protection and can recover errors that other traditional error correction mechanisms cannot.
Low Power
The X300 utilizes a SATA DEVSLP low-power mode to minimize its power consumption during idle periods. DEVSLP enables the SSD to completely shut off its SATA PHY, thus resulting in much lower power
consumption compared to SATA Slumber. This increases the amount of usable hours per battery charge,
which is essential for modern mobile devices.
TCO
SanDisk SSDs can improve total cost of ownership (TCO) by reducing downtime due to hard drive failures.
They also offer lower latency and greater read/write speeds over traditional HDDs6. IT departments
can extend the useful life of their PC inventory by upgrading the HDDs to the X300 SSD, thus prolonging
replacement cycles and maximizing asset value.
