背板输出端口
| USB 3.0（第 1代3.1）Type-A 端口数量 |
2 |
| eSATA端口数量 |
1 |
| S/PDIF输出接口 |
Y |
| 麦克风/音频输入插孔 |
Y |
| PS/2连接埠数量 |
1 |
扩展槽
| PCI Express插槽版本 |
2.0 |
| PCI Express × 4插槽 |
2 |
| PCI Express x8插槽 |
2 |
| PCI Express x16 插槽 |
2 |
内存参数
| 闪存 |
16 MB |
| 支持的内存模块容量 |
8GB, 4GB, 2GB, 1GB |
| 内存通道支持 |
Dual |
| 支持的内存类型 |
DDR3-SDRAM |
| 无错误检测和更正 |
Y |
| 內存插槽数量 |
2 |
| 最大内部存储 |
16 GB |
性能
| 音频系统 |
Realtek ALC892 |
| 主板芯片组系列 |
AMD |
| 主板南桥 |
AMD SB950 |
| 组件应用 |
PC |
内置输入/输出系统
| 前面板音频接头 |
Y |
| 机箱防盗接口 |
Y |
| CPU风扇接口 |
Y |
| PS电源接口 （8针） |
Y |
| 周边（莫仕）电 源连接器（4针） |
1 |
| SATA III连接器数量 |
9 |
| USB 3.0（第 1代3.1）连接器 |
2 |
| 风扇电源接头 |
Y |
| ATX电源接头 |
Y |
| S/PDIF输出端口 |
Y |
| USB 2.0接口 |
4 |
| 机箱风扇接头数量 |
1 |
基本輸出輸入系統/BIOS
| 清除CMOS按钮 |
Y |
| 基本输入输出系统类型 |
AMI |
处理器
| SMP（适用于表面安装的封装形式）处理器的最大数量 |
1 |
另外
| 主板晶片 |
AMD 990FX |
| 以太网路(RJ-45)连接接口数量 |
2 |
ATX AMD 990FX - AM3+, AMD 990FX/SB950, 240-pin DDR3, ATX, 9x SATA III, GLAN, RAID 0,1,5,10
The SAPPHIRE Pure Black 990FX is a full ATX sized board making full use of the features of the AMD 990FX and SB850 chipsets. Four dual channel memory sockets are provided, supporting up to 16GB of DDR3 memory with current technology, and capable of supporting up to 32GB when suitable modules become available. There are four USB 3.0 ports (two at the rear and two on a header supported by a high quality front panel kit) as well as eight USB 2.0 ports on the rear panel plus four more on a header.
Advanced connectivity is provided by Dual Gigabit LAN sockets plus Bluetooth with EDR (enhanced data rate). The board has eight SATA 3GB ports, featuring AHCI and RAID support, conveniently mounted on the edge of the board with right angle connectors and an additional SATA 3GB port brought out to the rear panel on an eSATA connector. The back panel also carries optical and SPDIF outputs as well as the standard I/O configuration for the on board HD 7.1 Audio.
Extensive expansion support is provided by six PCI-Express Gen2 slots which allow up to six single slot cards or three dual slot cards such as high end graphics cards in CrossFireX to be used. A standard 4-pin molex connector on the edge of the board can be used to provide additional power when multiple cards are used.
