性能
噪音水平(高速) |
28 dB |
转速(最小) |
400 RPM |
转速(最大) |
1400 RPM |
类型 |
Cooler |
适用于 |
Processor |
风扇数量 |
1 fan(s) |
风扇直径 |
120 mm |
风扇厚度 |
25 mm |
最大气流 |
79 cfm |
最小气流 |
20.7 cfm |
最低空气压力 |
0.12 mmH2O |
最大空气压力 |
1.56 mmH2O |
噪音水平(低速) |
5.3 dB |
处理器插座 |
Socket AM3, Socket AM3+, Socket AM2+, Socket FM2, Socket AM2, Socket FM2+, Socket FM1 |
重量和尺寸
风扇尺寸(宽×深×高) |
120 x 25 x 120 mm |
散热器重量 |
480 g |
散热片尺寸(宽x深x高) |
130 x 58 x 160 mm |
Kotetsu, Socket LGA775/LGA1150/LGA1155/LGA1156/LGA1366/LGA2011, Socket AM2/AM2+/AM3/AM3+/FM1/FM2/FM2+
At first sight, the Kotetsu might seem like a "mini Ashura" - a fact which visually can hardly be denied. When looking at the fundamental concept, however, the two similar looking coolers couldn't be more different. The Kotetsu was tailored for the PC user on a little tighter budget: It has "only" four heatpipes, for fresh air a 120mm GlideStream PWM is in charge - for the heat dissipation level of the new Haswell processors this combination is more than efficient, cooling performance will not disappoint. Despite being a budget-priced cooler, the Kotetsu is fitted with the latest H.P.M.S. (Hyper Precision Mounting System), and makes use of the "Narrow Fin" design.
M.A.P.S
The new Kotetsu also draws on the highly proven M.A.P.S. already having shown excellent results with the Mugen 3. Thanks to the optimized arrangement of the fins, pass-through airflow inside the heatsink is ramped up, leading to even better cooling performance.
Newly Developed Mounting System
Another new feature can be seen is the Kotetsu's new mounting system. Based on the over-the-years experience of CPU cooler mounting sytems and Scythe expertise, the kotetsu mounting was designed with the keywords "simplicity" and "reliability" in mind.
GlideStream 120 PWM
The supplied new Glide Stream 120 PWM fan with its' unique blade design is automatically controlled by the motherboard's PWM function, the temperature adjusts to the CPU.
Accessory:
Mounting plate x2 (Intel), mounting plate x2 (AMD), mounting bar x1, screws for clips x4, mainboard screws x8, mounting screws x2, back plate spacer (Socket 775) x1, washers x4, wrench x1, fan clips x2, thermal grease, backplate, installation manual