其他功能
空气压力 |
0.12 mmH2O |
风机性能 |
110.31 cfm |
转速 |
1900 RPM |
性能
噪音水平(高速) |
37 dB |
速度调节设置 |
2 |
类型 |
Fan |
适用于 |
Computer case |
风扇直径 |
120 mm |
120mm, 500 - 1900rpm, 7.5 - 37dBA, 24.5 - 110.31CFM, 146.5g, Black
Yet another case fan of the well known Slip Stream series. The Slip Stream 120 PWM Adjustable VR comes along with a fan controller with PWM to VR switch, providing the feature to adjust fan speed as required. By keeping the well-proved structure with a small center hub and large blades, high air flow is generated at a low RPM, enabling high efficiency at a low noise level. Turning the fan controller knob in PWM mode adjusts the PWM range from a minimum of 470 to 1340 rpm to a maximum of 740 to 1900 rpm. Running in VR mode, PWM will be cut off and fan speed can be adjusted between 500 to 1900 rpm.
High efficiency - low noise
Built in typical Slip Stream case fan structure, with a small dimensioned center hub and large blades, the Slip Stream 120 PWM Adjustable VR provides high efficiency at a low noise level.
PWM / VR switch
The Slip Stream 120 PWM Adjustable VR comes along with a PCI bracket switch allowing to choose between PWM and VR mode. By sliding the switch the corresponding mode will be chosen.
Please note: In order to take advantage of PWM function, please use the motherboard with PWM features build-in.
Fan Speed control in PWM and VR mode
Slip Stream 120 PWM Adjustable VR is equipped with a fan controller. By turning the knob, PWM-range or fixed speed in VR mode can be adjusted.
Please note: PWM function will not work if the fan is connected via 4-Pin peripheral connector or connected to 3-Pin fan port. In this case, the fan will spin at the maximum speed.
The case fan comes with an adaptor for 4-Pin Molex connector.