Seagate Desktop HDD STM301003N1AAA-RK Internal Hard Drive - 100GB 100GB Ultra-ATA/133 internal hard drive

Seagate STM301003N1AAA-RK Ultra ATA/100 Internal Hard Drive - 100GB - 7200rpm - 100MBps Ultra ATA/100 (ATA-7) - Ultra ATA/100 (ATA-7) - IDE/EIDE - Internal - Keep the drive in the protective anti-static container until ready to install.
- Protect the drive from static discharge by wearing a grounded wrist strap. Attach the wrist strap to the metal chassis of your computer.
- Handle the drive by the edges of the frame.
- Do not apply pressure or attach labels to the circuit board or the top cover of the drive.
- Turn off the power to the host system before installation.
- Standard 40-pin ATA interface cable, or an 80-conductor cable if running UATA66/100/133 (max length: 18 inches).
- An unused drive power cable for your new drive.
- Needle-nose pliers for removing or adding jumpers.
- A computer that supports UDMA Modes 3 and 4 (5 for UltraATA100, 6 for UltraATA133).
- A 40-pin, 80-conductor cable (available from your dealer). This cable is provided with current UltraATA hard drive retail kits. It can be identified by its having a blue connector to connect to the motherboard, a grey connector to connect to the slave drive, and a black connector to connect to the master drive.
- An Operating System that handles DMA transfer modes (Windows 95/98/Me/2000/XP).