技术细节
内置显示器 |
N |
USB版本 |
2.0/3.0 (3.1 Gen 1) |
动态主机配置协议客户 |
Y |
內置式 |
N |
联网
以太网的数据传输率 |
1000, 100, 10 Mbit/s |
以太网铜缆技术 |
100BASE-TX, 10BASE-T, 1000BASE-T |
网络连接类型 |
Ethernet LAN |
协议
支持网络协议 |
DHCP, BootP, ARP, TCP, UDP, ICMP, IGMP, TFTP, HTTP, HTTPs, Zeroconf, DNS, SLP, SNMPv1, SNMPv3, SNTP, SMTP, POP3, SSL/TLS, Bonjour |
管理协议 |
SNMPv3 |
支持管理信息基本原则 |
MIB-2 |
Professional USB Device Management, Gigabit Ethernet, 1 x USB 3.0, 2 x USB 2.0, EU
The myUTN-250 USB Deviceserver extends USB ports for USB devices over a local network by Ethernet cable. In this way, USB devices of any type can be used anytime – independent of location and USB cable lengths!
The UTN Manager software tool shows the availability of all connected USB device servers in the network along with the attached devices and establishes the desired connection. The USB 3.0 SuperSpeed port allows an even faster data transfer than the previous model.
<b>The "Pro" for Professional Needs</b>
Benefit from professional features such as VLAN-ability. This feature allows you to assign a unique IP address to each USB port. In this way, you can define discrete networks for departments or work groups – flexibly and completely location-independent!
With myUTN-250 you have complete control over the three integrated USB interfaces and the attached USB devices. Simply deactivate individual ports or allow individual users to access a certain port via port key control. Use the notification function to receive status reports about the attached USB devices via e-mail or SNMP trap. You will immediately be notified if a USB device is pulled off. You can also use this feature for remote maintenance of your myUTN-250 USB Device Server.
It also comes with many security features: In addition to the secure point-to-point connection, myUTN enables you to limit access to USB device types defined by you.