SMS 9982 NF, adjustable SAT output level for 8 subscribers
<b>Cascadable Multiswitch</b>
<b>Premium-Class</b>
With adjustable SAT output level for 8 subscribers.
<b>Features:</b>
<b>SAT-IF:</b>
- SAT-IF amplifiers precompensating 4 dB slope
<b>IF selection logic:</b>
1. Using the analogue control signals 14/18 V, 0/22 kHz and ToneBurst or the DiSEqC commands Polarity, Band and Position
2. Using the mode selector available for each receiver to swap
The multiswitches support a standby mode. The SAT-IF amplifiers and the LNB remote voltage are only active when at least one receiver feeds a remote voltage to its multiswitch outlet
The multiswitches support DiSEqC 2.0. Bidirectional communication between receiver and multiswitch is possible
9 isolated termination resistors are shipped with the multiswitches to terminate the trunklines
<b>Spec:</b>
Inputs / Outputs: 9 / 9 +8
SAT / Terr.: 8/1
Outputs / Subscribers: 8
Tap loss
Terr.: passive 5 ... 862 MHz :18 ... 21,5 dB
Tap gain
Terr.: active 47 ... 862 MHz: 3,5 ... 0,5 dB
SAT: 950 ... 2200 MHz: -2,5 ... 6,5 dB
Loss Trunklines
Terr.: passive 5 ... 862 MHz: 5,5 dB
Gain Trunklines
Terr.: active 47... 862 MHz: 18 dB
SAT-IF: 950 ... 2200 MHz: 13 ... 17 dB
Noise figure Terr.: < 7 dB
Noise figure SAT: < 7 dB
Max. output level
47 ... 862 MHz 60 dB IMA3 / EN 50083-3: 105 dBμV
950 ... 2200 MHz 35 dB IMA3 / EN 50083-3: 109 dBμV
Rejection
Terr. passive / SAT: > 30 dB
Terr. active / SAT: > 26 dB
Terr. / SAT: > 32 dB
Isolation
Trunk / Trunk:> 30 dB
Receiver / Receiver: > 28 dB
Mains power supply U~: 100 ... 240 V / 50 ... 60 Hz
Power consumption
max. Terr. 18 V / 250 mA: 36 W
max. Terr. 0 V: 34 W
Standby / Terr. 18 V / 250 mA: 6W
Standby / Terr. 0 V: 3W
LNB remote current: 800 mA
Single port current: 400 mA
Current consumption from Receiver: 25 mA
Ambient temparature: -20 ... +50 °C
