18 Channel System Generation 2 Md2
Combining the unparalleled speed and precision of DSMX technology with superior ergonomics and the most impressive suite of pro-class features ever found in a handheld transmitter.
<b>Powerful Features for the Expert Pilot</b>
The Spektrum AirWare software that comes in the DX18 transmitter offers all the programming features an expert pilot could want. And the intuitive SimpleScroll interface makes navigating menus and changing settings as simple as "roll and click." It's almost like using a mouse.
Many Spektrum AirWare features are innovations you won't find anywhere else, innovations that make flying safer and programming easier.
<b>Programmable Voice Alerts</b>
With voice alerts, you can keep tabs on important functions without ever taking your eyes off what you’re flying. They can be programmed to call out what flight mode you’ve chosen or report telemetry information on demand. If an alarm goes off, you won’t have to look at the transmitter display to see what’s happening. The transmitter will tell you.
<b>Pro-Class Programming for Sailplanes</b>
In addition to extensive airplane and heli programming, the DX18 transmitter has the most impressive sailplane programming features you'll find in any handheld transmitter. Ten available flight modes, 5 wing types, 3 tail types, 2 motor types, flap delay with elevator compensation-it has it all. You even have the ability to adjust individual servo characteristics (end points, travel, center, etc.) for all 18 channels.
<b>Built-In Sequencer</b>
Program a sequence of switch-activated events with time delays between each event. For instance, with a flip of the gear switch you could have an auxiliary channel open landing gear doors, then have the retract channel lower the landing gear, followed by the auxiliary channel closing the gear doors after the gear is extended.
<b>Built-In Servo Balancer</b>
No more will you need a complicated network of little boxes littering your fuselage if you want to balance servos. You can precisely balance the output of CCPM swash servos or multiple servos on a single control surface using a 7-point curve mix.
<b>Wireless Trainer Link</b>
The wireless trainer link gives instructors the option to wirelessly ''buddy box'' with another DSM2/DSMX transmitter. Once bound to another transmitter, ModelMatch™ technology will allow the DX18 to re-link without having to go through the bind process again.
<b>250 Model Memory</b>
The enormous capacity of the DX18's on-board memory means you will rarely, if ever, need to juggle models between transmitter memory and your SD card. The model memory menu is easier to navigate too. Only memory slots with model settings saved to them will appear. You won't have to scroll through empty slots or move models around if one is deleted.
<b>X-Plus Channel Expansion</b>
Both the DX18 transmitter and its AR9020 receiver are X-Plus capable, meaning you can add up to eight extra switch channels with an X-Plus channel expansion module. You just plug the module into the AR9020 and bind it. It's just what anyone who flies complex scale models or high-performance sailplanes needs.
<b>Stay up to date</b>
Register your DX18 transmitter and receive alerts whenever a new AirWare version is available.
