存储介质
| 可支持的存储驱动器数量 |
5 |
| 存储驱动器安装数目 |
5 |
| 支持的存储驱动器类型 |
HDD, SSD |
| 存储驱动器安装类型 |
HDD |
| 安装存储驱动器 |
Y |
| 存储驱动器尺寸 |
3.5 " |
| RAID 配置 |
10, 1, JBOD, 5, 6 |
| 存储驱动器接口 |
Serial ATA |
| 热插拔驱动器托架 |
Y |
| 安装存储总容量 |
10000 GB |
| 存储驱动器容量 |
2000 GB |
能量控制
| 功耗（一般操作） |
59 W |
| 交流电（AC）输入电压 |
100-240 V |
| 交流电（AC）输入频率 |
50/60 Hz |
设计
| 內置式 |
N |
| 液晶显示器指示灯 |
Y |
| 噪音水平 |
30 dB |
| 认证 |
FCC: Class B, CE: Class B, BSMI: Class B |
| 机箱板型 |
Desktop |
| 风扇数量 |
2 fan(s) |
其他功能
| 尺寸（宽 x 深 x 高） |
248 x 233 x 157 mm |
| 电源需求 |
100-240V |
重量和尺寸
| 深度 |
233 mm |
| 重量 |
4100 g |
| 宽度 |
248 mm |
| 高度 |
157 mm |
环境条件
| 储存温度范围 (T-T) |
-10 - 70 °C |
| 运行湿度范围(H-H) |
5 - 95% |
另外
| 产品色彩 |
Black |
| 运行温度范围（T - T） |
5 - 35 °C |
10TB DX510 Expansion Unit, 5X 3.5"/2.5" SATA, eSATA, 59W
Expansion Unit for Increasing Capacity of the Synology DiskStation
Synology DX510 delivers an effortless solution for volume expansion and data backup for selected Synology DiskStations. The DX510 smoothly scales the storage capacity of the Synology DiskStation by an additional 5 hard drives on the fly when firmly connected directly to the Synology DiskStation, ensuring a reliable expansion solution.
- Plug-n-use;
- Hot-swappable HDD design;
- Hibernation;
- Managed from Synology DiskStation Manager 2.3.
Volume Expansion & Backup
When running out of the hard drive capacity on the Synology DiskStation, the Synology DX510 provides an easy way to immediately scale capacity by an additional 5 hard drives. The RAID volume on the Synology DiskStation can be expanded directly without having to reformat the existing hard drives, ensuring the Synology DiskStation continues its service during the capacity expansion. When created as a separate volume, the Synology DX510 provides a great solution for backing up the Synology DiskStation.
Reliable Plug-n-use Design
The Synology DX510 is connected to the Synology DiskStation using an eSATA cable with custom-designed connectors on both ends, ensuring a reliable connection and maximum throughput. The eSATA 3.0 Gb/sec definition allows the hard drives in the connected Synology DX510 to operate as they are the internal ones of the Synology DiskStation.
Green & Easy to Manage
The HDD hibernation can be manually configured to take effect automatically when the system has been inactive for a period of time. This not only save energy but also extends the lifespan of the hard disk.
Synology DX510 is managed with the DiskStation firmware Synology DSM 2.3. No firmware installation is needed.
