技术细节
日期显示 |
Y |
防水深度 |
10 ATM |
计时码表 |
Y |
发光表盘 |
Y |
瑞士制造 |
Y |
视距仪 |
Y |
动力储备 |
50 h |
书夹装置类型 |
Mechanical (auto wind) |
Watch dial type |
Analog dial |
防水深度可达 |
100 m |
表针的数量 |
3 |
设计
表盘颜色 |
Black |
耐刮擦玻璃 |
Y |
类型 |
Wristwatch |
手表标志风格 |
Arabic numerals |
格式要素 |
Round |
手表玻璃类型 |
Sapphire |
表带材质 |
Leather |
设计 |
Luxury |
建议性别 |
Male |
43mm, Titanium carbide, Black alligator, 50h reserve, Waterproof 100m
Functions
Central chrono seconds
Ceramic bezel with tachymeter scale
Crown stamped with the TAG Heuer logo
Date window at 3 o'clock
Double anti-reflective treatment for better readability
All our watches are fitted with sapphire crystal. This is cut from a polished slice of solid sapphire that has been created by the fusion and crystallization of alumina. Sapphire is so hard that only a diamond can scratch it.
Hand-applied TAG Heuer logo
Open flange and large numbers make seconds easy to read
Polished minute and hour hands with luminescent markers
Red chronograph hands
Scratch-resistant curved sapphire crystal
Scratch-resistant smoked sapphire caseback
Three original counters for running seconds, chrono minutes, hours
Water resistant to 100m ensured by rigorous manufacturing standards and strict testing.
Movement
Calibre 1887
TAG Heuer Calibre 1887 . Swiss Made. Automatic calibre. Diameter: 29.3 mm (13''') — 39 rubies. Rapid date correction.
Movement performance
Balance frequency: 28.800 vibrations per hour (4 Hz). Power reserve: about 50 hours, about 40 hours when the chronograph is engaging.
Movement display
Hours — minutes — small seconds at 9. Chronograph minutes at 12 and chronograph hours at 6. Date at 6.
Movement decoration
Oscillating mass: 'Côtes de Genève' engraved 'TAG Heuer — Calibre 1887 Swiss Made'.
Materials & Care
Case
Grade 2 titanium coated with titanium carbide
Bezel
Black ceramic
Strap
"Soft touch" black alligator red stitching and lining
Cleaning
To maintain the esthetic appeal of your watch and keep it in good working order, you should clean it regularly as follows:
- First make sure the crown is fully screwed down.
- If the seals in your TAG Heuer watch have been changed and tested at an authorised TAG Heuer service centre within the last 12 months, then you can use a soft brush with slightly soapy water to clean the case and bracelet, then rinse it with clear water and dry it with a soft cloth. If your watch is fitted with a strap made from fabric, leather, alligator or python skin, take care not to get it wet
- If you have any doubts about the water-resistance of your watch, simply clean it with a soft brush then dry it.
- Avoid contact with chemical products (solvents, detergents, cosmetics, etc.) They may damage the bracelet and the water-resistance gaskets.
Condensation
If the temperature changes suddenly, a slight amount condensation may appear under the crystal of your watch. This mist will disappear by itself and will not affect the functioning of the watch. If the condensation persists, please see your official
TAG Heuer dealer.
Water resistance
Water resistance is not a permanent condition. The rubber seals that are designed to ensure against water entry, are under constant pressure and given time will deteriorate. For this important reason we recommend that a watch should be checked annually to ensure that the seals remain intact. This thorough and extensive testing includes pressure tests and bench tests and is considered an essential element in the care and maintenance of our watches.
Setup
For all movements
- Make sure that your watch is perfectly dry.
- Move the crown carefully to make the various changes that are possible.
- Avoid changing the date between 8:00 pm and 4.00 am.
- Once the changes are made, push the crown back in and (depending on the model) screw it down against the case to preserve its water-resistance.
For mechanical movements
- When a mechanical self-winding watch is not worn for a certain amount of time, its power reserve (42 – 48 hours depending on the model) is exhausted and the watch stops. To restart it, unscrew the crown if necessary (depending on the model) and wind the movement manually by turning the crown 30- 40 times. This will give it a sufficient power reserve to function normally.
- A non-automatic mechanical watch has to be wound every day, winding is complete when you feel the crown resist. Your TAG Heuer is then wound to the maximum. It is important not to force the crown of a hand-wound watch to avoid damaging the mechanism.
Bracelets/Leather straps
Straps in fabric, leather and alligator or python skin
- Avoid all contact with water (baths, showers etc). Despite your care and attention, leather is a natural, living material and its color will fade a little over time.