产品特点
| 最大载重量 |
1 kg |
| 表面工艺 |
Tiles & metal |
| 容易移除 |
Y |
| 容易粘贴 |
Y |
| 可调高度 |
N |
2 x hook, 3 x strip, 1 kg
Adhesive Nail for Tiles & Metal 3kg
The tesa® Adhesive Nails for Tiles and Metal and the corresponding Adhesive Strips, included, can hold up to 3 kg per nail. They're specially designed to reliable hold decorative items and kitchen utensils on smooth and solid surfaces like tiles, most metals and plastics indoors. Easy and convenient mounting without the surface damage and hassle associated with a hammer or drill. The patented Powerstrips® Technology makes the Adhesive Nail removable in seconds, leaving no trace on your surface, and is reusable with a new tesa® Adhesive Strip.
- For smooth and solid surfaces like tiles indoors
- For objects up to 3kg per nail or 6kg using 2 nails
- Removable without a trace
- Reusable with a new strip
tesa® Adhesive Nails for Tiles & Metal 3 kg work with the included Adhesive Strips to provide a simple, secure and damage free way to hang kitchen utensils or other small decorative items on surfaces like tiles, metal, veneer and glass where drills or hammers would cause damage. Each Adhesive Nail holds up to 3 kg, and using two nails can double the holding power.
<b>How to apply – Step by step</b>
- For the best possible bond, clean the surface with a silicone-freewindow cleaner or methylated spirit. The surface should be completely dry before application.
- The Adhesive Strip should be applied to the rougher surface.
- Press down evenly over the entire strip for at least 5 seconds and only then remove the protective foil. Be careful not to touch the exposed adhesive area at any time.
- Now apply your tesa® Adhesive Nail by aligning it with the top edge of the strip and then folding it down. Press down evenly on the entire nail for at least 5 seconds.
- The tab should be left accessible behind your object or beneath the nail for easy removal.
tesa® Adhesive Nails for Tiles & Metal are made for use on surfaces like tiles, metal, veneer and glass – surfaces where drilling or using a hammer is very likely to result in cracks, chips or breakages. That’s not the case with this Adhesive Nail – there’s no need for tools. All you need to hang your object is inside the pack. Adhesive Nails provide you with the ideal way to hang pictures and other small decorative items.
<b>Simple to attach, even easier to remove</b>
Hanging your object using a tesa® Adhesive Nail for Tiles & Metal takes a matter of minutes. When you want to move your object or change it for something new, it's easy. Just grab the exposed tab and stretch the strip down up to 35cm, slowly and parallel to the wall, to release the thousands of tiny bonds that make up the adhesive surface. Make sure not to press the adhesive nail or your object against the wall while doing this as this may prevent the strip from stretching and cause it to tear.
<b>Use again</b>
This Adhesive Nail can be used more than once so it fits in well with an environmentally aware lifestyle. Just get a refill pack of tesa® Adhesive Strips for Tiles & Metal from your tesa® Smart Mounting System retailer to reuse your Adhesive Nail again and again.
For solutions to mounting on glass, plaster, wallpaper, brick and other surfaces, please use the Product Finder and refer to our other tesa® Smart Mounting Solutions.
*Not suitable for any non-stick materials.
