Transition Networks CFETF1013-205 Internal 100Mbit/s 1300nm Multi-mode network media converter

Fast Ethernet Media Converter, 100BASE-TX (RJ-45) [100 m/328 ft.], 100BASE-FX 1300nm multimode (SC) [2 km/1.2 mi.] - Round trip delay of only 40 bit times—far below the Class II rating of 92 bit times.

- Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.

- AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.

- Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.

- Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.

- Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.

- Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.

- Remote Firmware Upgrade

- Point System™ Chassis
Can be used with any Point System™ Chassis.