性能
| 发射功率（最小） |
-15 dBmW |
| 链路预算 |
16 dB |
| 最大传输距离 |
2000 m |
| 发射功率（最大） |
-8 dBmW |
| 波长 |
1300 nm |
联网
| 以太网铜缆技术 |
100BASE-FX, 100BASE-TX |
| 转换器输入接口 |
100Base-TX |
| 转换器输出接口 |
100Base-FX |
| 数据传输速度 |
100 Mbit/s |
| 以太网的数据传输率 |
100 Mbit/s |
其他功能
| 遵守工业标准 |
IEEE Std. 802.3 100BASE-FX, 100BASE-TX |
另外
| 数据传输率（最大） |
100 Mbit/s |
| 连接方式 |
Wired |
| 以太网路(RJ-45)连接接口数量 |
1 |
100BASE-TX to 100BASE-FX, 100 Mbit/s, ST, IEEE 802.3, 76 x 119 x 25 mm, 0.9 kg
-Operates under heavy traffic loads without excess heat, so there is no need for a failure-prone internal fan.
-Round trip delay of only 40 bit times—far below the Class II rating of 92 bit times.
-
Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
-
AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
-
Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
-
Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
-
Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.
-
Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
-The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.
