性能
波长 |
1310 nm |
最大传输距离 |
20000 m |
光纤模式结构 |
Single-mode |
另外
数据传输率(最大) |
100 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
连接方式 |
Wired |
Fast Ethernet, 100BASE-TX (RJ-45) [100 m/328 ft.], 100BASE-FX 1310nm single mode (SC) [20 km/12.4 mi.]
Deliver low cost, fiber optic connectivity to the desktop with these full-featured PCI powered media converters,designed to install directly inside a workstation or file server and mount into any slot on a standard PCI. No configuration is required; making installation a breeze. Since power is drawn directly from the PCI slot, no additional power supply is needed, nor is there any CPU utilization.
- AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
- Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
- Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Easily installs inside PC or file server; no configuration required; no drivers to install.
- Provides LEDs for easy network monitoring
- Saves space over traditional stand-alone converters
- No need to replace existing NICs
- Draws power directly from PCI slot; no power supply needed