性能
光纤模式结构 |
Multi-mode |
发射功率(最大) |
-14 dBmW |
波长 |
1300 nm |
灵敏度 |
-30 dBmW |
发射功率(最小) |
-19 dBmW |
最大传输距离 |
2000 m |
另外
数据传输率(最大) |
100 Mbit/s |
以太网路(RJ-45)连接接口数量 |
1 |
连接方式 |
Wired |
Fast Ethernet Media Converter, 100BASE-TX (RJ-45) [100 m/328 ft.], 100BASE-FX 1300nm multimode (ST) [2 km/1.2 mi.], NA
Transition Networks's 100BASE-TX to 100BASE-FX Extended Temperature Media Converters make cost-effective integration of twisted pair and fiber optics in industrial environments easier than ever before.
- Extended Temperature Capable This converter is designed to operate in environments where ambient temperatures can rise to as high as 65°C (149°F).
- AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
- Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
- Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- The converter will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.