性能
波长 |
1550 nm |
最大传输距离 |
20000 m |
光纤模式结构 |
Single-mode |
联网
以太网的数据传输率 |
10, 100 Mbit/s |
以太网铜缆技术 |
100BASE-TX |
另外
以太网路(RJ-45)连接接口数量 |
1 |
连接方式 |
Wired |
数据传输率(最大) |
100 Mbit/s |
100BASE-TX (RJ-45) 328 ft, 100BASE-FX 1550nm TX/1310nm RX single fiber single mode (SC) 12.4 mi, North America
<b>Fiber Integration</b>
Used in pairs or as a single unit, this mini media converter will ease the integration of fiber optic cabling into copper-rich Fast Ethernet environments
<b>Extend Network Distance</b>
Fiber supports the transmission of Fast Ethernet data over much longer distances than is possible twisted pair
<b>Low-Latency Design </b>
As a layer-1 design, this Mini converter will retransmit Fast Ethernet signals without any store-and –forward packet inspection delays found in other layer-2 devices
<b>Small Size</b>
Ideal for conversion locations where available space is at a premium
- 65% smaller than standard media converter
<b>FEATURES</b>
- Auto-Negotiation (802.3u)
- Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
- AutoCross™
- Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Far End Fault (FEF)
- A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Automatic Link Restoration
- Transition Networks's converters will automatically re-establish link in all network conditions.
- Interoperable with other 100Base-TX/FX NICs, hubs, or switches
- Supports SFP modules
- Supports Jumbo Frames up to 9016bytes