性能
波长 |
1310 nm |
链路预算 |
25 dB |
灵敏度 |
-33 dBmW |
发射功率(最小) |
-8 dBmW |
最大传输距离 |
40000 m |
光纤模式结构 |
Single-mode |
发射功率(最大) |
-3 dBmW |
1310nm TX / 1550nm RX, single fiber, single mode, SC, 4x RJ-48, 6-pin DIN
These products offer a low cost transport capability for four T1/E1 lines and one RS232 data channel line. The converters provide copper connections compatible with G.703 and AMI/B8ZS/HDB3; while the optical connection will run at 155Mbps. A hardware-based solution guarantees the constant bit rate of TDM transport without requiring traffic management. The product provides physical layer status monitoring and alarm classification functions for Telecom operators to manage their fiber optic network and reduce operation and maintenance costs. Target applications of the converter include: FTTx, such as Fiber-to-the-Business, Fiber-to-the-Building, Fiber-to-the-MDU and Fiber-to-the-Home.
- Remote Management
- Local and Remote Loopback
- This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes.
- AIS/TAOS
- LEDs for each data port
- DIP switches for line code, line length, local loopback or remote loopback
- T1/E1 mode switch
- Dry Relay Contacts on each TDM port
- Local (AUX) Management Interface (RS232 connector)
- Switch selection for Data or Management mode on RS232 interface
- Access to complete status information on local and remote device
- Access to local and remote configuration
- Switch or SNMP selected Baud rate operation